User manual 3M 3M-MATIC CTS CONTINUOUS TAPING SYSTEM

[. . . ] 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] WEEE Statement The following information is only for EU-members States: The mark shown to the right is in compliance with Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. RoHS Statement 3M Projection Systems can provide RoHS certification for products meeting the RoHS directive. 1 European (EU) Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC, RoHS compliant means that the product or part does not contain any of the substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS, as amended:(a) 0. 1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0. 01% (by weight) for cadmium. This information represents 3M's knowledge and belief, which may be based on information provided by third party suppliers to 3M. 1 6 © 2008 3M. All Rights Reserved. Operator's Guide 3MTM Micro Professional Projector MPro110 Package Contents 1 2 3 4 5 6 Projector Battery Charger/AC Adapter Video Cable VGA Cable Battery RCA Adapter 3 4 1 2 Note: In some regions, the battery charger/AC adapter will come with an outlet adapter. 5 6 Parts 1 2 3 4 5 6 7 Focus Wheel Lens Power On/Off Video IN VGA IN Power and Charge LEDs DC Power IN 1 3 2 6 45 7 © 2008 3M. All Rights Reserved. 7 Operator's Guide 3MTM Micro Professional Projector MPro110 Getting Started Install Battery The 3M MPro110 comes with a rechargeable Lithium-Ion (Li-Ion) battery. The battery should be charged before using the projector with the battery. Important Note: Switch projector OFF and disconnect all cables before installing the battery. Use only the 3M-specified battery: 78-6969-9974-3. To install the battery: slide the back cover off, insert the battery, and reinstall the cover. 8 © 2008 3M. All Rights Reserved. Operator's Guide 3MTM Micro Professional Projector MPro110 Charge the Battery The 3M MPro110 comes with a battery charger/AC adapter. Use the battery charger/AC adapter to power the projector when the battery is not charged or installed and to charge the battery. Tip: The video output on some devices is turned off by default. Please refer to the device's documentation for details on enabling the video. Powering Off Slide the power switch to the OFF position. Disconnect video, VGA and AC adapter cables. © 2008 3M. All Rights Reserved. 11 Operator's Guide 3MTM Micro Professional Projector MPro110 Image Size Increase or decrease the projector-to-wall distance 305 mm (12 in) to 1800 mm (71 in. ) to project an image ranging from 163 mm to 975 mm (6. 4 in. to 38. 4 in. ) wide. Projector-To-Wall Distance 305 mm (12 in) 610 mm (24 in) 914 mm (36 in) 1219 mm (48 in) 1524 mm (60 in) 1800 mm (71 in) Image Width 163 mm (6. 4 in) 235 mm (9. 3 in) 355 mm (14 in) 523 mm (20. 6 in) 739 mm (29. 1 in) 975 mm (38. 4 in) Focus Adjustment Rotate the focus wheel until the image is clear. Cleaning Projector 1 Turn off the projector and disconnect power and other cables. If the dust is difficult to remove, dampen the cloth with clean water and then wipe the projector clean. Then use a clean cloth to dry the projector. Important Notes · Do not use cleaning chemicals or solvents to clean the projector. Cleaning chemicals and solvents may cause the plastic parts to discolor. 12 © 2008 3M. All Rights Reserved. Operator's Guide 3MTM Micro Professional Projector MPro110 Troubleshooting Problem Image is fuzzy Cause Projector-to-screen distance outside of limits. [. . . ] This warranty does not cover any additional costs including, but not limited to, those associated with removal, cleaning or installation of the 3M product, adjustments, (mechanical or electronic) made to the 3M product. This warranty covers only normal use of the product. 24-hour-per-day or other excessive continual use causes strain and is not considered normal use. This warranty does not cover consumables (e. g. , fuses), other than lamps and only as set forth below. [. . . ]