User manual 3M DATA COMMUNICATIONS AND COAX CABLE DETECTION INSTRUMENTS

[. . . ] · Locate coax cable · Map coax cable · Locate telecom cable · Map telecom cable Locates Circuits with up to 7 remotes!The 3M DT-2000 DataCom/Coax Circuit Tracer can identify up to 7 different locations using 3M DT-2100 Remote Identifiers. The DT-2000 performs multiple tests on the following cable types, up to 1000 feet in length: · Unshielded telephone cables with RJ-11 and RJ-45 connectors · Ethernet 10 (100) Base-T · Token Ring · EIA / TIA-568 A/B · AT&T 258a · USOC · 50 or 75 ohm Coax with F or BNC connectors Engineered using tomorrow's technology for today's professional, the UL listed* 3M DT-2000 DataCom/ Coax Circuit Tracer provides the sought-after benefits of flexibility and multiple functions in the same unit. The 3M DT-2000 comes in a hard plastic storage case with seven DT-2100 Remote Identifiers. [. . . ] Tested to UL Standards. This kit includes: · Hard case · DT-2000 unit with rubber boot · DT-2100 remote identifiers · Adapter DT-2100 Remote Identifiers The 3MTM DT-2100 Remote Identifiers work as far-end termination modules with the 3M DT-2000. Each module has a unique electronic signature to ensure accurate mapping of individual circuits. The 3M DT-2000 works with up to 7 remote identifiers at once to identify specific cable connection locations. 3M DT-1000 Telecom Tester TM For single office and home office applications. The only UL-listed Telecom/Coax circuit tracer in the industry The compact, hand-held 3M DT-1000 Telecom Tester quickly verifies the condition of wiring in patch cords and coaxial cables not installed through walls or bulkheads. The DT-1000 uses both lights and speech to identify opens, shorts and good cables. It can also identify if a patch cord is straight through or cross pinned. Power is drawn from its ninevolt battery only during the actual test, saving battery life. The DT-1000 Telecom Tester tests RJ-44 and RJ-45 telephone cables as well as coaxial cables with connectors for F or BNC-type connectors (with F-to-BNC adapter), up to 1500 feet in length. For added protection in the everyday work environment, the UL-listed* DT-1000 features a molded rubber boot to absorb shocks and prevent keypad and connector damage. *Tested at the Underwriter's Laboratories, Inc. UL File #E214240. 3MTM DT-1000 Telecom Tester Features Two F-type coax jacks on the top and two RJ-11 / RJ -45 jacks on the front. LED and speech indication of cable condition. Power is drawn from the battery only during tests. Pair switch to configure set for 1, 2, or 4 pair cables. UL-listed. Advantages One unit allows end-to-end testing of different unshielded wiring schemed telephone and COAX cable jumpers and patch cords. Dual confirmation eliminates misinterpretation of ambiguous readings. Longer battery life. Benefits Saves time. Increases safety. Instant visual indication of wiring configuration. Eliminates the need for additional connectors. Absorbs shocks and prevents keypad and connector damage. Tested to UL standards. 3M DT-1000WT Wall Tester TM The only UL-listed wall tester in the industry The 3M DT-1000WT Wall Tester conveniently plugs directly into an active telephone jack with either RJ-11 or RJ-45 modular jacks for instant visual verification of wiring configuration. [. . . ] You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the date of purchase. [. . . ]