User manual 3M MAINTENANCE AND REPAIR OPERATIONS WITH NO TOOLS NEEDED

[. . . ] Application Profile Market: MRO Application Description: Maintenance & Repair Operations with No Tools Needed Key Application Requirement Grinding, cleaning, coating removal (mill scale, paint and rust), prep for paint, etc. on a 4. 5" Right Angle Grinder; MOS 13, 300 RPM. PRODUCTS (bulk packs) 3MTM TN Disc Pad (051111-56573, 5 each) All applications ­ stays on grinder Scotch-BriteTM TN RS Disc CRS (048011-33096, 10 each) Mill scale/weld spatter removal Scotch-BriteTM TN XT Disc (048011-33194, 10 each) Rust/heavy coatings removal 3MTM TN Fibre Disc 785C (051111-60719, 25 each) Heavy stock removal 3MTM TN Flap Disc 747D (051111-55805, 10 each) Medium stock removal/blending Product or Process Replaced The NTN (No Tools Needed) platform was specifically designed to eliminate the need for retainer nuts and spanner wrenches. [. . . ] The abrasive media should touch the back up pad; the action of the grinder will draw the TN nut down onto the back up pad when grinding. The strength in the system is the ease of removal. ­ Let the Scotch-BriteTM TN XT Disc do the work!Very little pressure needs to be applied in order for this disc to effectively remove coatings and rust. ­ If the Scotch-Brite TN RS CRS Disc seems to lose cut, run it over a sharp edge to expose more CubitronTM Abrasive Grain. Market: MRO Application Description: Maintenance & Repair Operations with No Tools Needed page 3 Safety Information Always read and follow all safety information included with the product. Do not exceed maximum operating RPM's. Follow safety operation procedures posted in work areas. To request additional product information or to arrange for sales assistance, call 1-866-279-31235. Address correspondence to: 3M Industrial Business Customer Response Center, Building 21-1W-10, 900 Bush Avenue, St. All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application. [. . . ] Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability. For Additional Information Product Use Warranty and Limited Remedy Limitation of Liability 3M, Scotch-Brite, and Cubitron are trademarks of 3M Company. Industrial Business Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55106 MROntn. pdf © 3M 2004 IBD4238 [. . . ]