User manual 3M RANDOM ORBITAL SANDING FOR CABINET SHOPS

[. . . ] For a long lasting, durable paper product, use 734U: - Features 3MTM CubitronTM Abrasive Grain - C weight paper backing provides greater tear resistance and longer life than A or B weight paper discs - Load resistant coating ensures excellent disc life For a consistent, high quality finish, use 255L: - Features a premium aluminum oxide mineral - Polyester film backing provides excellent tear resistance versus paper discs - Fast cutting action and consistent, uniform finishes - Load resistant coating For the best possible finish, use 415U: - Silicon carbide mineral - A weight paper backing - Load resistant coating 3M Industrial Business 148241 Market: Woodworking Application Description: Random Orbital Sanding for Cabinet Shops Product Selector Guide Best Finish 415U 255L 734U Best Cut/ Longest Life Process Information Step 1. Initial sanding should level the work piece if not previously sanded by a wide belt machine. For quick leveling and aggressive, coarse sanding operations, use a disc in grade 80 or 100. [. . . ] Periodically check machinery and mountings hardware to make sure they are in good operating condition. Repair or replace damaged machinery and mounting hardware. Inspect product prior to installation on equipment for defects or damage. During use, if unusual vibrations or changes occur, immediately stop the equipment. Sand the entire work piece to give a consistent finish. Check that the random orbital sander backup pad has a clean, even surface to reduce any chances of wild defects. Clean all work surfaces prior to sanding. To avoid "swirls" or "hook" marks when using a pneumatic (air) sander, ensure that the sander has the proper air pressure. When the tool is running, it should have a minimum of 90 PSI (pounds per square inch). Whether using an electric or air sander, start the sander flat on the work piece and keep the backup pad as flat as possible to prevent gouging. NEVER stop the sander while the tool is in contact with the work piece. Stopping the sander on the work piece may create wild scratches. Stop the tool as it is removed from the work piece. Sand in a smooth, back and forth, up and down motion. Clean wood dust from the work piece between sanding steps. This will assist in reducing "the re-sanding of dust". 3MTM StikitTM Disc 255L - 100 discs/roll 3MTM HookitTM Disc 255L - 75 discs/box (P80), 100 discs/box (P100 through P220) 3MTM HookitTM 5" (5 hole) Disc 255L - 75 discs/box (P80), 100 discs/box (P100 through P220) 255L Grades P80 P100 P120 P150 P180 P220 Hookit Stikit 5'' Hookit 5'' 5'' (5 holes) UPC # 051144- UPC # 051131- UPC # 05113182471-7 82470-7 82469-4 82468-7 82467-0 82466-3 00967-7 09966-0 00965-3 00964-6 00963-9 00962-2 01067-3 01066-6 01065-9 01064-2 01063-5 01062-8 3MTM StikitTM Disc 415U - 125 discs/roll (80 through 120), 250 discs/roll (150 through 220) 3MTM StikitTM Disc 415U - 5" (5 hole) discs/roll (80 through 120), 250 discs/roll (150 through 220) 3MTM HookitTM II Disc 415U - 50 discs/box Stikit 415U Stikit 5'' Hookit II 5'' 5'' (5 holes) Grades UPC # 051144UPC # 051111UPC # 05114480 100 120 150 180 220 77223-0 77227-8 77230-8 77234-6 77237-7 77241-4 77224-7 77228-5 77231-5 77235-3 77238-4 77242-1 49675-6 49645-9 49646-6 49647-3 49648-0 49649-7 Accessories There are three types of disc pads available: Standard: tapered edge offers conformability along the edge of the disc Low Profile: consistent support across the entire disc Low Profile Finishing: soft disc pad for sanding applications requiring more conformability Market: Woodworking Application Description: Random Orbital Sanding for Cabinet Shops Safety Information Always read and follow all safety information included with the product. [. . . ] 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M's and seller's sole obligation will be, at 3M's option, to replace the product or refund the purchase price. [. . . ]