User manual 3M X50

[. . . ] PLEASE READ This manual is provided as a free service by Projector. com. We are in no way responsible for the contents of the manual. We do not guarantee its accuracy and we do not make any claim of copyright. The copyright remains the property of their respective owners. ABOUT PROJECTOR. COM Projector. com (http://www. projector. com) is your review and buying guide resource for DLP and LCD video projectors. [. . . ] · Do not reset the lamp time unless you have replaced the lamp. And, always reset the lamp time when replacing the lamp. The message functions will not operate properly if the lamp time is not reset correctly. · Before replacing the lamp, carefully read the descriptions headed "THE LAMP". Refer to FILTER TIME: This function displays the total time the air-filter has been used since new. Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]: Depress the RESET button for at least 3 seconds while filter time is being displayed. After you replace the filter, select RESET on the menu with the button. DEFAULT CANCEL · Do not reset the filter time unless you have cleaned or replaced the filter. And, always reset the filter time when cleaning or replacing the filter. The message functions will not operate properly if the filter time is not reset correctly. · Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER". fro m Select WHISPER Mode: NORMAL WHISPER When WHISPER is selected the WHISPER mode is activated. In the WHISPER mode, acoustic noise and screen brightness are reduced. Pr Adjust AUTO OFF Time: Long (MAX. 1 min. ) (DISABLE: 0 min. ) The system automatically enters the standby mode if no signal is received within the set time. This function is inactive when DISABLE (0 min. ) is selected. oje c to r . c 12 : SELECT Example : OPTION Menu (VOLUME) OPERATING THE PC SCREEN You can use the remote control as a simplified mouse or keyboard. CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment. · Before connecting, read the manuals of the device you will connect. · Do not unplug the connector cables while the computer is operating. PS/2, ADB, Serial Mouse Control STANDBY/ON VIDEO RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME END OFF FREEZE PAGE DOWN MUTE KEYSTONE Available Functions POSITION MENU Move Pointer Left click with mouse Pr Use Use Press END button Press ESC button ENTER Right click with mouse ESC RESET USB Mouse/Keyboard Control fro Move Pointer Left click with mouse Right click with mouse 1. Connect the projector's USB terminal to the computer using a USB cable. The functions in the table below can be controlled. Available Functions Remote Control Operation buttons Press ENTER button Press RESET button Press HOME button de d Press keyboard's HOME key Press keyboard's END key Press keyboard's PAGE UP key Press keyboard's PAGE DOWN key Press keyboard's ESC key m wn loa NOTES · It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e. g. track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing devices. In addition, the mouse may not function if the computer does not have the needed utility program. [. . . ] 78-8118-8106-5 RS-232C Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-8118-3312-4 Soft case with shoulder strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-6969-9715-0 Soft rolling luggage case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-6969-9716-8 Ultra value warranty S50 (US only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]