User manual 3R SYSTEM NEONLIGHT

[. . . ] Allow to cool before putting on or taking off parts, and before cleaning the appliance. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. [. . . ] Water is a crucial part of every espresso-so it’s most important to always have it professionally filtered. Using the “INTENZA+” water filter will prevent mineral deposits from building up and improve your water quality. 1 Remove the small white filter from the water tank and store it in a dry place. 2 Remove the “INTENZA+” water filter from its packaging, immerse it vertically (with the opening positioned upwards) in cold water and delicately press the sides so as to let the air bubbles out. 3 Set the filter according to the measurements performed to set the water hardness. Use the water hardness test strip provided with the filter. Set the “Intenza Aroma System” as specified on the filter package. A = Soft water B = Hard water (standard) C = Very hard water 4 Put the filter into the empty water tank. Press it until it cannot move further down. 5 Fill the water tank with fresh water and reinsert it into the machine. Write down the date of the next water filter replacement (+ 2 months). 6 To activate the water filter, dispense the entire water tank by using the hot water function (see section “Hot Water Dispensing”). 7 Fill the water tank again. The machine is now ready. ENGLISH 15 ADJUSTMENTS The machine allows for certain adjustments so that you can brew the best tasting coffee possible. Saeco Adapting System Coffee is a natural product and its characteristics may change according to its origin, blend and roast. The machine is equipped with a self-adjusting system that allows the use of all types of coffee beans available on the market (not for caramelized beans). The machine automatically adjusts itself after brewing several cups of coffee to optimize the extraction of the coffee to the compactness of the ground coffee. How to adjust the Ceramic Coffee Grinder Ceramic coffee grinders always guarantee accurate grinding for every coffee blend and prevent the beans from overheating. This provides for full aroma preservation, delivering the truly Italian taste in every cup. Warning: The ceramic coffee grinder contains moving parts that may be dangerous. Therefore, do not insert fingers and/ or other objects. Only adjust the ceramic coffee grinder using the grinder adjustment key. For detailed cleaning instructions please see the “Cleaning and Maintenance” section. If you want to brew an espresso after having dispensed steam, you first need to bring the machine back to the coffee brewing temperature. For this follow the steps described below: Steam/Coffee Switchover 1 After dispensing steam and pressing “ ” or “ ” button, the “ ” light flashes fast to show that the machine is overheated and cannot brew coffee. Flashing fast 2 To brew coffee, first drain a small amount of water. 3 Place a container under the hot water/steam wand (Pannarello, if supplied) and turn the control dial clockwise to the “ ” position. 4 Hot water will be dispensed. 5 Wait for the temperature “ ” light shines steadily. 6 Then turn the control dial counterclockwise back to the “ ” position to stop dispensing. 7 Now follow the procedure described in the “Brewing espresso” section to brew coffee. 22 ENGLISH DISPENSING HOT WATER Warning: Danger of scalding!Dispensing may be preceded by small jets of hot water. The hot water/steam wand may reach high temperatures: Never touch it with bare hands. Use the appropriate protective handle only. 1 Before dispensing hot water, check that the green temperature “ ” light shines steadily. If the light flashes slowly, wait for the machine to heat up. Steady on 2 Place a cup under the hot water/steam wand (Pannarello, if supplied); 3 Turn the control dial clockwise to the “ dispensed. ” position. Hot water will be 4 To stop hot water dispensing, turn control dial counter-clockwise back to the “ ” position. ENGLISH 23 CLEANING AND MAINTENANCE Cleaning Caution: Timely cleaning and maintenance of your machine is very important as it prolongs the life of your machine. Your machine gets exposed to moist, coffee and limescale continuously!In this chapter it is described in detail which activities you need to perform at which frequency. [. . . ] Brew a few espressos as described in section “Saeco Adapting System”. Adjust the ceramic coffee grinder to a finer setting (see section “How to adjust the ceramic coffee grinder”) Change coffee blend or adjust the grind as explained in section “How to adjust the ceramic coffee grinder”. Prime the water circuit (section “Using the Machine for the First Time”). Clean the brew group (section “Brew Group Cleaning”). The coffee ground drawer is inserted. [. . . ]