User manual 3R SYSTEM R101

[. . . ] Allow to cool before putting on or taking off parts, and before cleaning the appliance. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. [. . . ] Important Note: Immediately after using the Cappuccinatore to froth milk, clean the suction hose externally with a damp cloth. This way, all parts will be perfectly clean and free of any milk residue. 1 Remove the cover from the front side. Note: The cover can be placed on the machine side using the integrated magnet. 2 Insert the Cappuccinatore into its seat until it locks into place. Warning: Before using the Cappuccinatore, clean it along with the Thermos (if used), as described in the "Cleaning and Maintenance" section. 3 Insert the clean hose (according to your choice) in the milk Thermos or directly in the milk container. Note: To ensure better results when preparing a cappuccino, use cold milk. 4 Place the cup under the dispensing spout. Press the " " button. 24 ENGLISH 5 The machine needs a preheating time. 6 After preheating, the machine starts brewing the cappuccino. CAPPUCCINO 7 At this stage, the machine dispenses frothed milk. You can stop dispensing by pressing the “ ” button. ESC STOP MILK CAPPUCCINO 8 After dispensing milk, the machine brews coffee. You can stop brewing by pressing the “ ” button. You can enjoy your cappuccino just like at the coffee bar. After using the Cappuccinatore, clean it as described in the "Cleaning the Cappuccinatore" section. Remove the container or Thermos and clean it, if necessary. Note: The “WARNING CLEANING” function can be activated, if desired; this function reminds you when the Cappuccinatore needs to be cleaned. To activate this function, refer to the machine programming section on page 38. ESC STOP COFFEE Latte Macchiato The machine allows brewing a latte macchiato quickly and easily with the touch of a button. For correct cleaning, refer to the "CLEANING THE THERMOS" section (see pages 43-45). Warning: Before using the Thermos, clean it as described in the "Cleaning and Maintenance" section (See page 39). For correct storage, milk needs to be kept at low temperatures. The Thermos allows you to keep milk out of the fridge as long as it is necessary for its correct use. 26 ENGLISH At an ambient temperature of 20°C, the temperature of the milk in the Thermos increases by 4-6°C after 4 hours. Consider this approximate data to determine if milk can still be used in relation to the time it has been stored in the Thermos. 1 Loosen and remove the Thermos lid. 2 Pour milk into the Thermos. Fill in with milk from the MIN level indicator and do not exceed the MAX level indicator. 3 Reinsert the Thermos lid by screwing it. 4 Use only the supplied hose to connect the Thermos to the Cappuccinatore. B A This hose features two special fittings for optimum operation. The fittings are different from each other, i. e. fitting (B) is to be connected to the Cappuccinatore, while fitting (A) is to be properly connected to the Thermos. Note: The fittings cannot be exchanged, as this could cause the system to malfunction. 5 Remove the suction tube that is installed in the Cappuccinatore. ENGLISH 27 6 Insert the hose fitting in the Thermos. 7 Insert the fitting in the Cappuccinatore. The Thermos can now be used to brew milk-based products. Milk Container The milk container can be used directly with the machine to prepare the beverages. 1 For direct use of the milk container it is necessary to use the Cappuccinatore suction tube. This tube only features one fitting. 2 Check that the tube is inserted in the Cappuccinatore. Warning: In this case, make sure that the tube is clean on the outside as well, to prevent milk from coming into contact with the dirt on the outside of the tube. 3 Remove the clean suction tube and insert it directly into the container. Note: After use, remove the tube and wash it properly. Place the container back in the fridge for correct milk storage. 28 ENGLISH "SPECIAL" Products The machine is designed to brew other products not displayed on the control panel. [. . . ] Clean the dispensing spout and its holes. Position the dispensing spout correctly. The coffee grounds drawer is inserted. The machine grinds the coffee beans but no coffee comes out. Too low dose The coffee grind is too fine. The Brew Group is dirty. [. . . ]