User manual AASTRA 480I SIP IP PHONE

[. . . ] 480i SIP IP PHONE Release 1. 4 41-000098-00-08 User Guide Aastra Telecom will not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use. While every effort has been made to ensure accuracy, Aastra Telecom will not be liable for technical or editorial errors or omissions contained within this documentation. The information contained in this documentation is subject to change without notice. Copyright 2005 Aastra Telecom. www. aastra. com All Rights Reserved. SOFTWARE LICENSE AGREEMENT Aastra Telecom Inc. , hereinafter known as "Seller", grants to Customer a personal, worldwide, non-transferable, non-sublicenseable and non-exclusive, restricted use license to use Software in object form solely with the Equipment for which the Software was intended. [. . . ] To go back to the original call, press the line/call appearance button for this call. If you wish to add the new party to the conference, press the = button again. Picking up Calls If you are juggling multiple calls, you can scroll through call information by pressing the 3 and 4 navigation keys. If you wish to connect to an incoming call or re-connect to a call you placed on hold, press the line/call appearance button for the call or press the Pickup softkey. Jan 01 10:10am L1 Hold > 1202 Michelle LeBlanc Pickup 00:54 Jan 01 10:10am 01:33 L1 Conference > 1202 Michelle LeBlanc Drop Next 7. To drop a party from the conference, use the navigational keys to navigate to the desired party's call appearance screen or press the Next and Previous softkeys (if visible), and then press the Drop softkey. If the phone is already connected to a call, pressing the line/call appearance button for the new incoming call will automatically place the connected call on hold and answer the new call. Ending Calls To end a call, you first need to connect to the call, if not already connected, and press the N button or the Drop softkey. If connected through the handset, you can also place the handset back on hook to end the call. Jan 01 10:10am 01:52 L2 Conference > 1203 Juan Perez Drop Previous Note: If you disconnect from the conference, the other two parties will also disconnect. 480i IP Phone User Guide 21 Call Forwarding The call forwarding feature on the IP phone allows incoming calls to be forwarded to another destination. The phone sends the SIP message to the SIP proxy, which then forwards the call to the assigned destination. You can enable call forwarding on a global or per-line basis. If you have configured call forwarding on an individual line, then the settings for this line are used; otherwise, the global call forward settings are used. You can have up to 9 lines on the 480i configured for call forwarding. The following are the call forward modes you can configure for call forwarding: Call ForwardMode Off All Setting Call Forwarding Use the following procedure to configure phone-wide call forwarding. Press % on the phone to enter the Options List. Enter the "Call Forward" number destination for which you want your incoming calls to be forwarded. Note: If you leave the "Number" field blank, call forwarding is disabled. Handling Calls 4. Enter the "Call Mode" that you want to set on your phone. Enter the "Number of Rings" you want to set before the call is forwarded. Valid values are 1 to 9. Note: "Number of Rings" field applys to No Answer and Busy No Answer modes only. Description Disables call forward Phone forwards all incoming calls immediately to the specified destination. Phone forwards incoming calls if the line is already in use. Phone forwards the call if it is not answered in the specified number of rings Phone forwards the call if either the line is already in use or the call is not answered in the specified number of rings. Phone uses the phonewide call forward setting. This is only valid when setting the mode of individual lines. 6. Click on Basic Settings->Call Forward. Busy No Answer Busy No Answer Global For Global Call Forward Settings: 2. In the "Mode" field, select the mode you want to set on your phone. 22 480i IP Phone User Guide Handling Calls Note: To disable call forwarding in the Aastra Web UI, set the mode to OFF and remove the phone number in the "Number" field. Park Calls/Pick Up Parked Calls The 480i phone has a park and pickup call feature that allows you to park a call and pickup a call when required. There are two ways you can configure this feature: · Using a static configuration · Using a programmable configuration (configure a softkey) Note: The IP phones accept both methods of configuration. [. . . ] If replacement parts are used in making repairs, these parts may be refurbished, or may contain refurbished materials. If it is necessary to replace the telephone set, it may be replaced with a refurbished telephone of the same design and color. If it should become necessary to repair or replace a defective or malfunctioning telephone set under this warranty, the provisions of this warranty shall apply to the repaired or replaced telephone set until the expiration of ninety (90) days from the date of pick up, or the date of shipment to you, of the repaired or replacement set, or until the end of the original warranty period, whichever is later. Proof of the original purchase date is to be provided with all telephone sets returned for warranty repairs. [. . . ]