User manual ABC 3TEC PLUS

[. . . ] € Regular care and upkeep have a major part to play in maintaining the safety and value of the product. Exposure to such things as salt in the air, road-gritting salt or acid rain will encourage the onset of corrosion, as will inappropriate storage of the product. • We recommend regular maintenance of all coated parts. In serious cases of soiling please clean the surface coating immediately. [. . . ] € No claims may be made for damage caused by improper modifications to the product. € Areas of rust may appear through lack of maintenance or improper care and do not constitute a fault with the product. € Scratch marks are normal signs of wear and do not constitute a fault with the product. € Mildew is likely to appear on textiles which are not dried out after getting wet and cannot be attributed to shortcomings in production conditions. € The product may fade if exposed to sunlight, perspiration and detergents, or if subject to abrasion or excessive washing, therefore fading cannot be attributed to a fault with the product. € No claims may be made for wheels which become worn out as a natural result of wear and tear. Opening the pushchair Pull the front fork forward until it clicks into place. Pull the bar-type handle up until the frame engages. CAUTION: Ensure that all the catches are engaged before use. Fitting the wheels Undo the catch by pulling the metal bracket outwards. Insert the wheel in the fitting and release the metal bracket again. Fit the front wheel block onto the wheel block fitting. To take the wheels off, undo the catch by pulling the metal bracket outwards. Then pull the wheels out of the fitting. To remove the wheel block, turn the knob on the wheel block fitting clockwise and remove the wheel block from the fitting. Front wheel block lock and swivel settings Push the lever to the left to lock the wheels. Push the lever to the right for the swivel position. Operating the brake Press the lever down to engage the brake. Press the lever up to disengage the brake. Attaching the seat Attach the seat by placing it on the frame until it clicks into place. To remove the seat, pull the levers on both seat unit adapters and lift up the seat. CAUTION: The seat unit may only be used in the driving direction. [. . . ] To remove the carrycot, press the buttons on the adapter on both sides of the cot and lift the cot up to release it from the catches. CAUTION: Always check before use that the carrycot is correctly secured to the pushchair. Adjusting the bar-type handle Press and hold down the button on the bar-type handle and set to the required height. Folding the pushchair Press the round button (1) on the right-hand release catch in order to unlock the folding mechanism. [. . . ]