User manual ABIT AA8

[. . . ] AA8-DuraMAX Intel Pentium 4 System Board Socket 775 User's Manual 4200-0413-03 Rev. 1. 01 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] IDE IDE IDE IDE IDE IDE IDE IDE Channel Channel Channel Channel Channel Channel Channel Channel 0 Master 0 Slave 1 Master 1 Slave 2 Master 2 Slave 3 Master 3 Slave IDE1 IDE1 Enhanced None None SATA1 SATA3 SATA2 SATA4 Master Slave IDE1 IDE1 Combined SATA2 SATA4 None None None None Master Slave SATA Only SATA1 SATA3 SATA2 SATA4 None None None None Mode NOTE: The option [Enhanced Mode] does not support the Windows 98/ME operation system. PATA IDE Mode: This item determines the function mode for "IDE1"connector. [Primary]: "IDE1" connector served as [Primary Master] and [Primary Slave] channel. "SATA2" and "SATA4"connector served as [Secondary Master] and [Secondary Slave] channel. The remaining "SATA1" and "SATA3" connectors are disabled. [Secondary]: "IDE1" connector served as [Secondary Master] and [Secondary Slave] channel. "SATA1" and "SATA3" connector served as [Primary Master] and [Primary Slave] channel. The remaining "SATA2" and "SATA4" connectors are disabled. Refer to the following table for the relationships between IDE and SATA ports. PATA IDE Mode Primary Secondary IDE IDE IDE IDE IDE IDE IDE IDE Channel Channel Channel Channel Channel Channel Channel Channel 0 Master 0 Slave 1 Master 1 Slave 2 Master 2 Slave 3 Master 3 Slave IDE1 IDE1 SATA2 SATA4 None None None None Master Slave IDE1 IDE1 SATA1 SATA3 None None None None Master Slave NOTE: This option is configurable only when the item [On-Chip Serial ATA] is set to [Combined Mode]. SATA Port: This item displays the variety modes for SATA Ports. User's Manual 3-18 Chapter 3 OnChip PCI Device: Click <Enter> key to enter its submenu: OnChip USB Controller: This option enables or disables the USB controller. USB 2. 0 Controller: This option enables or disables the USB 2. 0 controller. USB Keyboard Support Via: This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] in OS environment. USB Mouse Support Via: This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS] in OS environment. OnChip Audio Controller: This option enables or disables the audio controller. SuperIO Device: Click <Enter> key to enter its submenu: AA8-DuraMAX BIOS Setup 3-19 Onboard FDD Controller: This option enables or disables the onboard FDC controller. Onboard Serial Port 1: This item determines which I/O addresses the onboard Serial Port controller will access. [Auto]: The system automatically select an I/O address for the onboard Serial Port. [3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an I/O address for the onboard Serial Port. [Disabled]: Disables the onboard Serial Port. Onboard Parallel Port: This item specifies the I/O address used by the parallel port. [Disabled]: This option prevents the parallel port from accessing any system resources. When the value of this option is set to [Disabled], the printer port becomes unavailable. [. . . ] They will be more familiar with local conditions and problems and will have better insight as to which resellers offer what products and services. Due to the huge number of emails coming in every day and other reasons, such as the time required for problem reproduction, we will not be able to reply to every email. Please understand that we are selling through distribution channels and don't have the resources to serve every end-user. However, we will try to do our best to help every customer. [. . . ]