User manual ABIT IL-90MV

[. . . ] Introduction Hardware Setup BIOS Setup Driver & Utility CD Intel Socket 478 (Core Duo) Micro ATX Motherboard Intel ViiV Technology Certified Intel 945GT/ICH7m-DH iL-90MV Motherboard Intel Socket 478 (Core Duo) Intel GMA 950 Appendix HDMI 1. 2 Technology RoHS Compliant 7. 1Ch HD Audio User's Manual Intel 82573L GbE LAN iL-90MV User's Manual English, 2nd Edition August, 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. Product names appearing in this manual are for identification purpose only and trademarks and product names or brand names appearing in this document are the property of their respective owners. [. . . ] CAS Latency Time (tCL) This item controls the latency between the DRAM read command and the time that the data becomes actually available. RAS# to CAS# Delay (tRCD) This item controls the latency between the DRAM active command and the read/write command. RAS# Precharge (tRP) This item controls the idle clocks after issuing a precharge command to the DRAM. Precharge Delay (tRAS) This item controls the number of DRAM clocks used for the DRAM parameters. System Memory Frequency This item selects the DRAM speed. iL-90MV 3-9 PCI Express Root Port Func Click <Enter> key to enter its submenu: Phoenix ­ AwardBIOS CMOS Setup Utility PCI Express Root Port Func PCI Express Slot 1 PCIe Compliancy Mode Auto v1. 0a Item Help :Move Enter:Select F5: Previous Values +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F6: Fail-Safe Defaults F7: Optimized Defaults PCI Express Slot 1 This option enables or disables the PCI Express port function. PCIe Compliancy Mode This item selects the mode for PCI Express add-on card. Back to Advanced Chipset Features Setup Menu Init Display First This item selects the primary boot device. HDMI Port Display This item selects the type of display device connected through the "HDMI Port" on this motherboard. [DVI]: Select this option if you are connecting a non-HDMI monitor through the "HDMI Port" on this motherboard. [Normal]: Select this option if you are connecting HDMI digital display through the "HDMI Port" on this motherboard. 3-10 iL-90MV An unmatched configuration will cause the display device abnormal. For example, an HDMI digital device connected to "HDMI Port" under the [DVI] selection will have no sound on the digital display, whereas a non-HDMI monitor connected to "HDMI Port" under the [Normal] selection will cause the screen flickering. Select the correct one for your display device. Frame Buffer Size This item selects the size of memory pre-allocated for frame buffer. DVMT Mode This item selects the mode of graphics memory that the system will support. DVMT/FIXED Memory Size This item selects the size of graphics memory that the system will support. BIOS Setup iL-90MV 3-11 3. 4 Integrated Peripherals Phoenix ­ AwardBIOS CMOS Setup Utility Integrated Peripherals On-Chip IDE Device On-Chip PCI Device Super-IO Device Onboard PCI Device Press Press Press Press Enter Enter Enter Enter Item Help :Move Enter:Select F5: Previous Values +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F6: Fail-Safe Defaults F7: Optimized Defaults On-Chip IDE Device Click <Enter> key to enter its submenu: Phoenix ­ AwardBIOS CMOS Setup Utility On-Chip IDE Device IDE Bus Master On-Chip IDE-1 Controller Enabled Enabled Item Help *** On-Chip Serial ATA Setting *** IDE X On-Chip SATA Mode Enabled X - SATA RAID ROM On-Chip SATA Controller Auto IDE-1 X - PATA IDE Mode *** IDE Channel Configuration *** IDE Channel 1 Master Auto IDE Channel 1 Slave Auto IDE Channel 2 Master Auto IDE Channel 2 Slave Auto IDE Channel 3 Master Auto IDE Channel 3 Slave Auto IDE Channel 4 Master Auto IDE Channel 4 Slave Auto :Move Enter:Select F5: Previous Values +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F6: Fail-Safe Defaults F7: Optimized Defaults 3-12 iL-90MV IDE Bus Master This option enables or disables the IDE bus mastering capability under the DOS environment. On-Chip IDE-1 Controller This item selects whether to enable or disable the IDE-1 controller. On-Chip SATA Mode This item determines the mode for on-chip Serial ATA. [IDE]: The on-chip Serial ATA served as IDE mode. [RAID]: The on-chip Serial ATA served as RAID mode. [AHCI]: The on-chip Serial ATA served as AHCI (Advanced Host Controller Interface) mode for advanced performance and usability. In the "Intel Matrix Storage Manager Option ROM" utility for the [RAID] mode configuration, the physical disk "Port Ø" indicates connector "SATA1", whereas "Port 2" indicates connector "SATA2". The [RAID] option is only available when the item "On-Chip SATA Controller" is set to [Enhanced Mode]. SATA RAID ROM BIOS Setup This item allows you to use the boot ROM of on-chip Serial ATA RAID to boot up system. [. . . ] Example: 512M* 4PCS Memory configuration: Type in the memory configuration in BIOS setting. Example: Memory Timing: 2. 5-3-3-7 @533MHz Graphics card: Type in the brand and model name of your graphics card. Example: ATI RADEON X850 XT PE Graphics driver version: Type in the driver version of your graphics card Example: Catalyst 5. 12V Power supply maker: Type in the brand and model name of your power supply unit. Power supply wattage: Type in the power wattage of your power supply unit. [. . . ]