User manual ABIT SI-2NS441

[. . . ] SI-2Ns44X Series Dual Xeon Server Board Socket 604 User's Manual Rev. 1. 00 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] [Combined Mode]: Parallel ATA and Serial ATA are combined together. [Enhanced Mode]: Enable both Parallel ATA and Serial ATA. Serial ATA 1 Mode / Serial ATA 2 Mode: This item determines the function mode for SATA1 and SATA 2 Port. Both SATA1 and SATA2 will be served each as one single IDE connector after selected as the following modes: Serial ATA Serial ATA Description Port 1 (SATA1) Port 2 (SATA2) · SATA1 serves as IDE-3 Master · SATA2 serves as IDE-4 Master IDE-3 Master IDE-4 Master · OnChip IDE-1 and IDE-2 controller enabled Enhanced · SATA1 serves as IDE-4 Master · SATA2 serves as IDE-3 Master IDE-4 Master IDE-3 Master · OnChip IDE-1 and IDE-2 controller enabled · SATA1 serves as IDE-1 Master Combined IDE-1 Master IDE-1 Slave · SATA2 serves as IDE-1 Slave · OnChip IDE-1 controller disabled Mode User's Manual 3-12 · · · · · · · · · · · · Chapter 3 SATA1 serves as IDE-1 Slave SATA2 serves as IDE-1 Master OnChip IDE-1 controller disabled SATA1 serves as IDE-2 Master SATA2 serves as IDE-2 Slave OnChip IDE-2 controller disabled SATA1 serves as IDE-2 Slave SATA2 serves as IDE-2 Master OnChip IDE-2 controller disabled SATA1 serves as IDE-1 Master SATA2 serves as IDE-2 Master OnChip IDE-1 and IDE-2 controller disabled · SATA1 serves as IDE-2 Master · SATA2 serves as IDE-1 Master · OnChip IDE-1 and IDE-2 controller disabled IDE-1 Slave IDE-1 Master IDE-2 Master IDE-2 Slave IDE-2 Slave IDE-2 Master IDE-1 Master IDE-2 Master SATA Only IDE-2 Master IDE-1 Master OnChip PCI Device: Click <Enter> key to enter its submenu: OnChip USB Controller: This option enables or disables the USB controller. SI-2Ns44X Series BIOS Setup USB 2. 0 Controller: This option enables or disables the USB 2. 0 controller. USB Keyboard Support Via: 3-13 This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] in OS environment. USB Mouse Support Via: This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS] in OS environment. SuperIO Device: Click <Enter> key to enter its submenu: Onboard Serial Port 1 / Onboard Serial Port 2: This item determines which I/O addresses the onboard Serial Port controller will access. [Auto]: The system automatically select an I/O address for the onboard Serial Port. [3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an I/O address for the onboard Serial Port. [Disabled]: Disables the onboard Serial Port. User's Manual 3-14 Chapter 3 Onboard Parallel Port: This item specifies the I/O address used by the parallel port. [Disabled]: This option prevents the parallel port from accessing any system resources. When the value of this option is set to [Disabled], the printer port becomes unavailable. [378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port address. The majority of parallel ports on computer systems use IRQ7 and I/O Port 378H as the standard setting. [278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port address. [3BC/IRQ7]: This option allows the parallel port to use [3BC/IRQ7] as its I/O port address. Parallel Port Mode: This item specifies the parallel port mode. [SPP]: (Standard Parallel Port) Allows bi-directional parallel port operation at normal speed. [EPP]: (Enhanced Parallel Port) Allows bi-directional parallel port operation at maximum speed. [ECP]: (Extended Capabilities Port) Allows bi-directional parallel port operation at a speed faster than the normal mode's data transfer rate. [ECP+EPP]: Allows parallel port operation at ECP and EPP mode. EPP Mode Select: This item selects the EPP mode. ECP Mode Use DMA: This item selects the DMA channel of the parallel port. SI-2Ns44X Series BIOS Setup 3-15 Onboard PCI Device: Click <Enter> key to enter its submenu: Graphic Controller This item enables or disables the onboard graphic controller. [. . . ] Please understand that we are selling through distribution channels and don't have the resources to serve every end-user. However, we will try to do our best to help every customer. Please also remember that for many of our technical support team English is a second language, you will have a better chance of getting a helpful answer if your question can be understood in the first place. Be sure to use very, simple, concise language that clearly states the problem, avoid rambling or flowery language and always list your system components. [. . . ]