Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ACER ACERPOWER M ACCURA. We hope that this ACER ACERPOWER M ACCURA user guide will be useful to you.
Lastmanuals help download the user guide ACER ACERPOWER M ACCURA.
Manual abstract: user guide ACER ACERPOWER M ACCURA
Detailed instructions for use are in the User's Guide.
[. . . ] The board has two memory banks composed of two 72-pin SIMM sockets each that support a maximum system memory of 128 MB using 32-MB SIMMs. The onboard 1-MB video memory is upgradable to 2 MB for a higher video resolution. The system board features a slot for the PCI/ISA slot board and two Mode 4 PCI enhanced IDE interfaces that support up to four IDE devices. [. . . ] Pull the SIMM out of the socket.
1 3 2
Figure 1-6
Removing a SIMM
1-12
User's Guide
1. 4. 5
Reconfiguring the System
You must enter Setup after installing or removing SIMMs to reconfigure the system. Follow these steps to reconfigure the system: 1. A memory error message appears, indicating that the total memory does not match the value stored in CMOS. A warning message appears indicating an incorrect memory configuration. Press wice to exit and reboot the system.
2. 3.
++ t
The system boots with the new memory configuration.
1. 5
IDE Hard Disk Support
The system board supports four IDE hard disks, or any other IDE devices, through the two onboard Enhanced IDE interfaces. See Figure 1-3 for the location of the interfaces. Follow the instructions in the housing installation manual on how to install a hard disk in the system. Connect the cables according to the IDE hard disk configuration in Table 1-4.
Table 1-4
IDE Hard Disk Configuration
Master Hard disk 0 Hard disk 2 Slave Hard disk 1 Hard disk 3
IDE Connector Channel 1 Channel 2
System Board
1-13
1. 6
CPU Installation
The system board comes with a zero-insertion force (ZIF) CPU socket for easy installation. Follow these steps to install a Pentium CPU: 1. Make sure that the notched corner of the CPU matches the pin 1 indicator on the socket.
Be careful not to bend any pins.
3.
Push down the socket lever.
STEP 1
STEP 2
Notched Corner
STEP 3
Pin 1 Indicator
Figure 1-7
4.
Installing a Pentium CPU
Set jumpers JP3 according to the CPU speed, and JX1, JP8, JP10, JP11, JP12, and JP13 for the correct CPU type. Refer to Table 1-1 for the jumper settings.
1-14
User's Guide
1. 7
Video Memory Upgrade
Larger video memory allows you to display higher resolutions and more colors. The system board comes with a 1-MB video memory onboard upgradable to 2 MB. Follow these steps to upgrade the video memory: 1. [. . . ] Contact your dealer.
Memory Error at: MMMM:SSSS:OOO (W:XXXX, R:YYYY) where: M: MB, S: Segment, O: Offset, X/Y: write/read pattern Memory Size Mismatch CPU Clock Mismatch
Run Setup. Check if the values shown in the memory parameters are correct. If correct, exit Setup and reboot the system. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ACER ACERPOWER M ACCURA
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ACER ACERPOWER M ACCURA will begin.
