User manual ACER ADVANCED-MP3-PLAYER

[. . . ] Support 7 EQ modes Support long time voice recording and VOX recording. Support changing the contrast and EL display time of LCD displaying. Support series play modes and A-B replaying. Can resume the playing state before turn off. 2 1. 4 The index parameter Index Hard disk Interface Storage medium Power Transfer speed Operation System Earphone Output Record Time Bit Rate Support Parameter specification IBM PC, compatible PC, notebook with USB interface Universal Serial Bus 1. 0/1. 1 (USB 1. 0/1. 1) Flash EMS memory Supply by USB interface without connect power, when play songs, need 1xAAA Max. [. . . ] If you select lyric off it will not display lyric files when playing. Check the memory information in the MP3 device. Filter recording noise. You can select filter levels from 1 to 6. Change the back light of the device. You can change the back light lamp time from 0 to 30 seconds, increments of 5 seconds. When you select the back light lamp time of 0 seconds, the back light will not activate if you press any key. With this item you can set the auto/off time when there is no 12 signal to the player. (2) Use professional lyric software to edit. The importance is that the lyric must be edited according to the playing time. Format " [mm:ss]" or " [mm:ss. fff] " (minute : sec) mm: minute ss: seconds For example: Angel's Tale [00:00. 00]Angel's Tale [00:12. 72]Here in my heart, [00:17. 55]Memories linger, 14 [00:22. 23]I hold them sacred, [00:28. 61]Safe from all others, [00:32. 99]Angel's tale. [00:42. 56]A love such a this, [00:47. 54]Once in a lifetime, [00:53. 17]Lost in your beauty, [00:58. 99]Still dreaming of you, [01:05. 32]Angel's tale. [01:12. 58]You drove the sinner from me, [01:19. 57]And shone with such glary, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [04:49. 74] make: xxy 2004. 2. 6 NOTE : Use Word Pad tool to edit, then save the file after finishing editing, choose ALL FILES in file type, the file extension name must be *. lrc in the saving dialog box. File Name: XXX. lrc (please make sure to put . lrc as an extension) File Type: All Files (please make sure to select All Files, not Text File) 4. 12. 2 Lyric file display In mp3 player, the name of song must be the same as the name of lyric files, and also they must be in the same folder. The extension of song files maybe *. mp3 or *. wma, while the extension of lyric files must be *. lrc. For example: yesterday once more. mp3 and yesterday once more. lrc 4. . 13 Sofftware usiing 4 13 So t ware us ng After you setup the software you can use the PC to manage your player: 4. 13. 1 Use the software to format your player: 1. If your MP3 Player is damaged, you may need to re-format the device using the MP3 Player's Format Tool. To select the MP3 Player Format tool, see below: 2. When you select the format tool, the following will appear and give you these options: 15 Volume: the device's volume when you change to the string you input for this item. Quick: when you select this item it will do a quick format for the device. Full: when you select this item it will do a full format for the device. Low: when you select this item it will do a low format for the device. Bootable: when you select this item it will create a bootable disk for you. Select the item and press the Start button, this message will appear as the follow, Click the YES button, it will format you disk automatic. 4. If you select the bootable item and use this tool to format the player, it will create a bootable disk for you , so that you can then use this Player to re-boot your computer. Warniing:: Please backup your data in the player before you want to do a format, Warn ng because it will erase all of your data when do a format. If you unplug the unit when the device is doing a low format, the device will be damaged! [. . . ] 7. . 2 7 2 LCD diispllay does nott show anytthiing:: LCD d sp ay does no show any h ng - Press the Play/Pause button to turn on the player. - If the above step does not resolve the problem, then do a "Firmware upgrade" and format the player. 7. . 3 7 3 For tthe Wiindow 98 user ­ When PC doesn''tt recogniize tthe pllayer. . For he W ndow 98 user ­ When PC doesn recogn ze he p ayer - If your operating system is Windows 98, please connect the player to the USB port of PC first and after it recognizes it as a new hardware, then install the driver. [. . . ]