Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ACER AL1906. We hope that this ACER AL1906 user guide will be useful to you.
Lastmanuals help download the user guide ACER AL1906.
Detailed instructions for use are in the User's Guide.
[. . . ] Do not spray liquid directly - it is best to lightly spray on to a cloth and wipe. If liquid gets inside the monitor it can cause electrical shock and/or damage to the unit. [. . . ] Pull the 4 hooks on bottom side of the base and hold. Separate the monitor and base and put them into carton.
Important First, find a clean, flat surface to place the monitor after removing it from the stand. Place a clean dry cloth under the monitor to protect it further. Pull the monitor slightly up and away from the stand.
Adjusting the Viewing Angle
The viewing angle of the monitor ranges from -5°~20°.
4
Connecting the Devices
Caution: Make sure that the computer and the monitor are both disconnected from the power supply.
Power Code VGA Cable
Attach the monitor to the power cord which should then be inserted into a properly grounded electric socket. Connect the signal cable to the VGA input socket of the monitor , and connect the signal cable to the VGA output socket of the graphics card on the computer. Then tighten the thumbscrews on the connector.
WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches the shape of the socket it is inserted into, and that none of the pins are bent or otherwise damaged.
Switching the Power
First, switch the power on to the monitor, then switch the power on to the computer. When you see the LED on the power button go green, this indicates the computer is ready for use. Allow about 10 seconds for the video signal to appear. If you do not see the green light on the power button or a video signal, check the connections.
5
Adjusting display settings
External Controls
1 AUTO If OSD is active, press to exit a selection in OSD. If OSD is inactive, press and the monitor will automatically optimize the position, focus and clock of your display. If OSD is active, press to select or adjust OSD options. 2
< >
MINUS If OSD is active, press to select or adjust OSD options.
3
PLUS Press to view OSD. Press again to enter a selection in OSD. [. . . ] Move or switch off electrical devices that may be causing interference. Inspect the monitor's video cable and ensure that none of the pins are bent. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ACER AL1906
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ACER AL1906 will begin.
