Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ACER ALTOS 700ED. We hope that this ACER ALTOS 700ED user guide will be useful to you.
Lastmanuals help download the user guide ACER ALTOS 700ED.
Detailed instructions for use are in the User's Guide.
[. . . ] Do not remove a board from its packaging unless you are ready to install it. Wear a wrist grounding strap before handling electronic components. Wrist grounding straps are available at most electronic component stores.
DO NOT attempt the procedures in the following sections unless you are confident of your capability to perform them. [. . . ] For example, for a total memory of 8 MB, install two 4-MB SIMMs in sockets 0 and 1 of Bank 0. You can not use an 8-MB SIMM alone for an 8-MB memory.
1-8
User's Guide
1. 3. 3
Removing SIMMs
Follow these steps to remove SIMMs: 1. Press the holding clips on both sides of the SIMM outward to release it. Pull the SIMM out of the socket.
1. 3. 4
Reconfiguring the System
Reconfigure the system after installing or removing SIMMs. Follow these steps to reconfigure the system: 1. A memory error message appears, indicating that the total memory does not match the value stored in CMOS. wrong memory configuration appears.
2. 3.
Press twice to exit Setup and reboot the system. system boots with the new memory configuration.
-
A message indicating a The
System Board
1-9
1. 4
SCSI Feature
The system board features a single-chip SCSI host adapter that adds SCSI I/O capability to the system. The chipset consists of an onboard microcontroller, bus master interface controller, and SCSI controllers. A 50-pin Fast SCSI-2 interface with 10 MB/s transfer rate and a 68pin Wide SCSI interface that transfers at 20 MB/s also come with the board to accommodate the SCSI devices. Before connecting any SCSI device to the 68-pin interface, connect a Wide SCSI daughter board that has a compact 68-pin SCSI connector. Figure 1-3 illustrates the daughter board.
1. 2.
68-pin compact SCSI connector 68-pin Wide SCSI connector (female)
Figure 1-3
Wide SCSI Daughter Board
1-10
User's Guide
1. 4. 1
Installing a Wide SCSI Daughter Board
Figure 1-4 shows how to install the Wide SCSI daughter board.
68-pin compact SCSI connector
Wide SCSI daughter board
68-pin Wide SCSI connector (male)
Figure 1-4
Installing a Wide SCSI Daughter Board
1. 4. 2
Using the SCSI Feature
Follow these steps to use the SCSI feature: 1. [. . . ] Run Setup and select the proper drive type. Run Setup and select the proper drive type. Modify DRAM configuration to agree with one of the options in Tables 1-1, 1-2, and 1-3. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ACER ALTOS 700ED
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ACER ALTOS 700ED will begin.
