User manual ACER ASPIRE E1-422G

[. . . ] Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HomeDialog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The temperature display and the alarm symbol Fig. The cause of the temperature being too high may be: - warm fresh food was placed inside - too much warm ambient air flowed in when rearranging and removing food - power failure for some time - the appliance is faulty The audible alarm is automatically silenced, the alarm symbol Fig. 3 (2) goes out and the temperature display stops flashing when the temperature is sufficiently cold again. If the alarm status persists: (see Malfunction). Note Food may be spoilt if the temperature is not cold enough. Do not consume spoiled food. 5. 5. 2 Setting the temperature The temperature depends on the following factors: - the frequency of opening the door - the room temperature of the installation location - the type, temperature and quantity of the food The temperature can be set from 9 °C to 4 °C, the recommended temperature is 5 °C. u For a higher temperature setting: press Up button, refrigerator compartment Fig. u For a lower temperature setting: press Down button, refrigerator compartment Fig. w When the button is pressed for the first time, the previously set value is indicated, flashing, in the refrigerator compartment temperature display. u To change the temperature in 1 °C steps: briefly press the button. u To change the temperature continuously: hold down the button. Deactivating the holiday mode u Briefly press the holiday button Fig. w The current cooling temperature is indicated in the display. The boxes can be removed and placed on the table as a single unit. Three small boxes are available through the customer service as optional equipment instead of one wide and one small box. Either one or both the boxes can be used. If particularly tall bottles are to be stored, hang only a single box above the bottle rack. u Re-positioning the boxes: Lift them for removal and reposition them as required. Dismantling door racks 5. 5. 5 Shelves Relocating the shelves The shelves have stops preventing them from being unintentionally pulled out. u Lift the shelf and draw it out forwards. u Re-insert shelves at the required height. The stops must face downwards and lie behind the front shelves. Dismantling shelves u The shelves can be dismantled for cleaning. u The door racks can be dismantled for cleaning. 5. 5. 8 Removing the bottle holder u Always take hold of the bottle holder on the plastic part. 5. 6 BioFresh compartment 5. 5. 6 Using the sectioned shelf The BioFresh compartment allows some types of fresh food to be stored up to three times longer than in conventional refrigerators, without compromising quality. For food with an indicated best before date, the date specified on the packaging always applies. 5. 6. 1 HydroSafe The HydroSafe at the moist setting is suited for storing unwrapped salad, vegetables and fruit with high inherent moisture. [. . . ] The warmest temperature reached during the power failure appears in the temperature display. → The freezer temperature rose too high over the last hours or days due to a power failure or power interruption. When the power interruption is over, the appliance will continue to operate in the last temperature setting. u To cancel the display of the warmest temperature: press alarm button Fig. [. . . ]