User manual ACER ASPIRE M3800

[. . . ] The serial number and model number are recorded on the label affixed to your computer. All correspondense concerning your unit should include the serial number, model number, and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated. Model Number :__________________________________ Serial Number:___________________________________ Purchase Date: ___________________________________ Place of Purchase: ________________________________ Acer and the Acer Logo are registered trademarks of Acer Inc. Other company's product names or trademarks are used herein for identification purposes only and belong to their respective companies. Front panel Rear Panel System Features Performance Multimedia Connectivity System peripherals Mouse (PS/2 or USB, manufacturing option) Keyboard (PS/2 or USB, manufacturing option) Speakers System upgrade Opening the computer Setting up new components 1 3 4 4 4 4 5 5 5 6 6 6 7 Acer eRecovery Create backup Restore from backup Create factory default image CD Re-install bundled software without CD Change password 8 8 9 9 9 10 Acer disc-to-disc recovery Restore without a Recovery CD Multilingual operating system installation 11 11 11 Setting up your computer Before commencing setup Selecting location Opening the package Connecting the peripherals Starting your computer Shutting down your computer 13 13 13 13 14 14 14 Troubleshooting Taking Care of your computer Important tips Cleaning and servicing To clean your computer and keyboard To clean your pointing device To clean your optical mouse 15 17 17 17 17 18 18 Contents System Tour 1 To clean your monitor When to contact a service technician Asking for technical assistance Energy Star Guidelines Compliance Declaration of Conformity for EU countries Modem notices TBR 21 Important safety instructions Lithium battery statement Laser compliance statement Declaration of conformity for CE marking Federal Communications Comission Declaration of Conformity 18 18 18 19 19 19 19 19 21 22 23 25 Remark: All the drawings in the Guide are diagrams. [. . . ] This improves system efficiency and helps the system support varied multimedia and software applications. Your AcerPower F3 has standard I/O (Input/Output) interfaces such as a parallel port, PS/2 keyboard and mouse ports, USB ports, two microphone ports and stereo line-out jacks (one at the front and one on the rear panel) and a stereo line-in jack. The system can accommodate extra peripheral equipment through those I/O ports. Support for an ethernet LAN is included as standard. In addition your system can also support an optional high-speed fax/data modem. Furthermore, the system is compatible with Windows® XP operating systems. English Before commencing setup Prior to setting up your AcerPower F3 System: · · Select a location Open the package Selecting location Selecting the optimum location for your computer: · · · Don't place the system too close to other electrical equipment. Don't place the system in high traffic areas or where the power cord or other cords may be stepped on. Avoid placing the system in any location that is excessively dusty or damp. Opening the package Open the package carefully and keep all packing materials for later use. Ensure that all items are present and in good condition. If any of the following items are missing or appear damaged, contact your dealer immediately. 14 English · · · · · AcerPower F3 Series PS/2 or USB keyboard (manufacturing option) PS/2 or USB mouse (manufacturing option) Speakers ( for selected models only) User's Guide and Starter poster Other user documentation and third party software. Connecting the peripherals Note: Don't connect the system power cord before connecting all peripherals to the system. After everything is connected, plug the power cord into the system and insert the other end into a power outlet. Starting your computer After connecting all the peripheral equipment, start your computer according to the below steps: 1 2 Power on all peripheral equipment, such as monitor, printer, fax, speakers etc. Once the start-up process is complete, you can begin to use the computer. Shutting down your computer From the "Start" Menu, select "Shut Down" and click OK. The total ampere rating of the equipment plugged in should not exceed the ampere rating of the cord if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating. Check the documentation that came with your software programs to see if you can select other combinations of resolution and color. These adjustments could make viewing the screen more comfortable. · · · Cleaning and servicing To clean your computer and keyboard 1 2 Turn off the computer and unplug the power cord. Use a soft cloth moistened with water and gently wipe the exterior of the computer and the keyboard. Do not use liquid or aerosol cleaners. 18 English To clean your pointing device To clean your mouse (with rubber ball) 1 2 3 Open the circular cover underneath the mouse. Take out the rubber ball and wipe it with a soft, damp cloth. Put the ball back and replace the cover. To clean your optical mouse For users of an optical mouse, refer to the documentation that came with your mouse for maintenance instructions. To clean your monitor Make sure that you keep your screen clean. For cleaning instructions, refer to the documentation that came with your monitor. When to contact a service technician · · · If you dropped and damaged the computer. If liquid has been spilled into the computer. If the computer is not operating normally. Asking for technical assistance For technical assistance, contact your local dealer or distributor. [. . . ] Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to local regulations. Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. [. . . ]