User manual ACER ASPIRE VN7-591G

[. . . ] 8 kWh/year adjustments when discrete graphics cards Not applicable are enabled (from 1 January 2016) Whether all discrete graphics card are Not applicable enabled during the test Whether switchable graphics mode with Not applicable UMA is driving the display during the test ETEC of highest power-demanding 17. 78 Watt Sleep mode with WOL enabled power Not applicable demand Off mode power demand 0. [. . . ] 78 Watt Sleep mode with WOL enabled power Not applicable demand Off mode power demand 0. 32 Watt Off mode with WOL enabled power Not applicable demand Maximum power demand Not applicable Internal power supply (IPS) efficiency at 10 %, 20 %, 50 % and 100 % of rated Not applicable output power External power supply's (EPS) average 86. 01% Noise levels (the declared A-weighted sound power level, LWAd) of idle mode Noise levels (the declared A-weighted sound power level, LWAd) of "HDD random seek" mode Minimum number of loading cycles that the batteries can withstand Configuration of memory Configuration of internal storage Configuration of discrete television tuner Configuration of discrete audio card Configuration of discrete graphics cards Configuration of discrete graphics cards category The battery in this product cannot be easily replaced by users themselves For products with an integrated display, the total content of mercury is 3. 2 B 400 cycles 4GB~16G 1 piece 0 piece 0 piece 0 piece Not applicable No 0 mg 4GB~16G 1 piece 0 piece 0 piece 1 piece G1 No 3. 2 B 400 cycles 0 mg Measurement methodology for ETEC COMMISSION REGULATION (EU) No 617/2013 of 26 June 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for computers and computer servers: ANNEX II Ecodesign requirements and timetable: 1. 15 Equipment category: personal computers and workstations. EN 61960:2011 Secondary cells and batteries containing alkaline or other nonacid electrolytes — Secondary lithium cells and batteries for portable applications: 7. Measurement methodology for battery loading cycles Sequence of steps for achieving a stable condition with respect to power demand Description of how sleep mode was selected or programmed EN 62623:2013 — Desktop and notebook computers — Measurement of energy Description of how off mode was selected consumption: or programmed 5. ENERGY STAR® Program Requirements Sequence of events required to reach the Product Specification for Computers, mode where the equipment automatically Eligibility Criteria Version 6. Sequence of events required to reach the mode where the equipment automatically Not applicable changes to off mode The length of time after a period of user inactivity in which the computer automatically reaches a power mode that 30 minutes has a lower power demand requirement than sleep mode The length of time before the display sleep mode is set to activate after user inactivity User information on the energy-saving potential of power management functionality User information on how to enable the power management functionality Test parameter for ambient temperature Test parameter for test voltage Test parameter for frequency Test parameter for total harmonic distortion of the electricity supply system 10 minutes http://www. [. . . ] Measurement methodology for battery loading cycles Sequence of steps for achieving a stable condition with respect to power demand Description of how sleep mode was selected or programmed EN 62623:2013 — Desktop and notebook computers — Measurement of energy Description of how off mode was selected consumption: or programmed 5. ENERGY STAR® Program Requirements Sequence of events required to reach the Product Specification for Computers, mode where the equipment automatically Eligibility Criteria Version 6. [. . . ]