User manual ACER AT2356

[. . . ] This manual will guide you in the use of the many exciting features found on ACER Digital televisions. These features will enhance your viewing experience, making your television viewing more enjoyable than ever before. However, before you begin to use your new TV set, it is important that you read through this entire manual for complete operating instructions. After you are finished with this manual, please retain it for future reference. [. . . ] A channel number will appear on the upper right corner of screen. Also, the red indicator light on the TV will come on. Standby (Soft Off) With the main power ON, press the Standby button on the remote control. This will put the TV in "Standby" or soft off mode. The red indicator light on TV set will NOT turn off. To turn the TV on again, simply press the Standby button on the remote control, or press one of the CH +/ - buttons on the TV set. Power Off With the power ON or in Standby mode, press the MAIN POWER SWITCH on the front of the TV set to completely turn off the power to the TV set. The red indicator light on the front of the TV set will turn off. Auto Off If the TV is ON (not Standby mode), and there is no signal is coming into the TV set for 15 minutes, the TV will turn off. Note: Avoid switching the TV on and off frequently or rapidly. Doing so may shorten the life span of internal components. Use the up & down arrow keys to move between the various settings. When finished, press the "Menu" key to return to the main menu. Channel: This feature allows you to select the channel being displayed. Either use the left & right arrow keys or the numeric keypad to select the channel. Add/Erase: This feature is used to either add or remove the presently selected channel from the active channel list, which is used by the TV when CH +/ - is pushed. Use the left & right arrow keys to select ADD or ERASE. Antenna : This feature sets the TV tuner to an Air antenna or a Cable antenna. Please use Air mode when using an over-the-air antenna; use Cable mode for a cable hookup. Use the left & right arrow keys to select between the two options. Auto Program: This feature will automatically add channels to your channel list, based on the presence of a signal. If a signal is detected, that channel will be added. [. . . ] You are responsible for all packing, transportation and insurance charges for the set to and from the Service Center. Limited One (1) Year Warranty Apex Digital, lnc. further warrants the parts in this product against defects in materiaIs or workmanship for a period of one (1) year after the date of original retail purchase with exception of the remote control which is guaranteed for ninety (90) days. will replace a defective part with a new or refurbished part without charge to you, except that if a defective part is replaced after ninety (90) days from the date of original retail purchase, you are responsible to pay all labor charges involved in the part(s) replacement including all packing, transportation and insurance charges for the set to and from the Service Center. [. . . ]