User manual ACER AT2630B

[. . . ] This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to tapes, discs, speakers, accessories, or vehicle electrical systems. This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. [. . . ] When poor reception occurs, please consult your dealers or qualified service personnel. FLA 0 0 9 Start Up 0 1 Start Up Remote Control - Put batteries into the remote Remote Operation 1 Aim remote directly at LCD TV monitor for clear signal. 3 Do not have obstructions between remote and TV reception. 4 Battery life span is between 6 months to one year depending on usage. Once reception is weak, it is about time to replace batteries. Recognizing buttons and controls Top / Front Control Panels 0 Recognizing buttons and controls Remote Control: battery installation 1 2 3 1 Depress the battery cover and slide out to the direction of the arrow indicated on cover. Install batteries in correct order as indicated. Slide battery cover in reverse order as indicated. Batteries Installation Know how 2 3 4 Note 1. It is dangerous to install batteries in the wrong order. Batteries may leak and cause damage to the remote control!Do not mix different brands or new and old batteries together during battery change!Never recharge batteries which are not rechargable!Do not puncture or throw used batteries in fire as this may cause explosions! 0 1 1 Recognizing buttons and controls 0 1 Recognizing buttons and controls Recognizing buttons and controls Remote Control Buttons 2 Recognizing buttons and controls 1. Press AUDIO again to select another audio language. The audio display will disappear automatically if the AUDIO button isn't pressed again for 3 seconds. Basic Control 8 Basic Control b. Select DISC MENU using UP/DOWN and then press RIGHT to enter the submenu. Select the disc menu language you desire using UP/DOWN and then press ENTER to confirm the setting. Press LEFT to return. Input the 4 digit password (3308), and then press ENTER to confirm the parental level setting. Note: After inserting the disc in the player, if the parental setting of the player prohibits playing the disc, the following menu will appear in the screen: Note: Language selection is only available for discs recorded in the languages listed in the submenus above. If not, the player will play and display on the screen the original recorded language contained in the disc. Select PARENTALusing UP/DOWN and then press RIGHT to enter the submenu. Select YES using LEFT/RIGHT and press ENTER. Then input your password. 0 2 5 SETUP Basic Control SETUP Basic Control e. Select PASSWORD using UP/DOWN and then press RIGHT to enter the submenu. SETUP Basic Control Note: The default password is 3308 and this password is always effective whether you've changed it to another new one or not, in case that you forget the new password. To avoid others using it to set the parental level and change the password, you may note this default password by other means and delete it from this manual. Some discs can be limited depending on the age of users while some discs can not. f. Select DEFAULTS using UP/DOWN and then press RIGHT to enter the submenu. [. . . ] In some vehicles, it may be necessary to attach the "S" connector to the rail directly, as it may not be long enough to reach back to the ring. Adjust all the straps tightly so that the bag is secure. Plug one end of the cigarette lighter adapter into the DC 12V input; then plug the other end into the cigarette lighter socket. Figure 2 0 3 3 Note 0 3 Note Playing a Video Game Plug the AV output from your game system into the AV IN jack on the front of the unit. You can use the attached AV cable to convert the 3. 5mm AV jack on the unit to RCA type AV jacks, and match the color-coded jacks to the appropriate plugs: Yellow (VIDEO) to Yellow, white (AUDIO L) to White, and Red (AUDIO R) to Red. [. . . ]