User manual ACER AT3258ML

[. . . ] 3) Do not install this video product where it is likely to be exposed to water. 4) Do not obstruct the slots and openings in the cabinet. They are provided for ventilation and are necessary to ensure reliable operation of the TV and to protect it from overheating. This TV should never be placed near or over a radiator or heat register. [. . . ] The screen may also be rotated from side to side. NOTE: Do not force the screen beyond its rotational limit of fifteen degrees. In vertical mount applications it is not necessary to release and position the screen. D. POWER BUTTON 8. TV/AV1/AV2 SELECT BUTTON 9. DC 12V INPUT Plug the male end of the supplied adapter into this jack, then plug the other end into your AC power outlet. NOTE: Never disconnect the cord from the unit before the plug is removed from the wall outlet. 4 128-6317 2. LINE OUT This is a standard 1/8 stereo jack that provides a fixed low level output. DC 12V OUTPUT You can connect this jack to an Audiovox VC-6000 Wireless Camera Receiver. AUDIO R INPUT 1, AUDIO L INPUT 1, VIDEO INPUT 1 AUDIO R INPUT 2, AUDIO L INPUT 2, VIDEO INPUT 2 For input of an external A/V source such as video game, camcorder, digital camera etc. Always match the color-coded cable to the appropriate jacks: Yellow (video) to Yellow, White (left audio) to White, and Red (right audio) to Red. You can press TV/AV1/AV2 to select the audio and video source. NUMERICAL BUTTONS Use these buttons to make a direct channel selection. The channel number chosen will be displayed on the screen for 4 seconds. Channel selection is carried out with 0-9 keys (0-99ch) and "1--" key when in cable mode (100125ch). 6 128-6317 4. SKIP/SEARCH BUTTON This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV only stops on channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When SKIP mode is off, the TV is in search mode and will stop on all active channels. Press this button until SKIP MODE ON is displayed on the screen. Then when the channel up and down keys are used, the TV will stop only on the TV channels stored in memory. Press this button until SKIP MODE OFF is displayed on the screen. Then all the TV channels will be shown using the channel up and down keys. TV/CATV Press this button to select the regular 69 channel broadcast TV and the 125 Channel Cable TV (Standard Cable, HRC Cable, and IRC Cable) with the on screen display. 6. [. . . ] This button may also be used to disengage search and pause modes. "F. FWD. " FAST FORWARD BUTTON If this button is pushed while the tape is stopped, tape will fast forward. If this button is pushed while the tape is playing, the VCP will go into fast forward search mode. REPLAY BUTTON Pressing this button will rewind tape and immediately begin playback when the tape is fully rewound. [. . . ]