User manual ACER G233HL

[. . . ] Record the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to the unit. All correspondence concerning the unit should include these information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated. Acer Altos G330 Series Model Name : G330 Part Number: MU. R2600. 007 Purchase Date: Place of Purchase: Acer and the Acer logo are registered trademarks of Acer Inc. [. . . ] Levér det brugte batteri tilbage til leverandøren. Ved utskifting benyttes kun batteri som anbefalt av apparatfabrikanten. Brukt batteri returneres apparatleverandøren. Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. 48 3 System upgrade To replace the CMOS battery: 1 2 3 4 Perform the pre-installation instructions described on page 26. Lay the server on its side (components showing). If necessary, remove any cables that prevent access to the CMOS battery socket. When a field is selected, it is highlighted in white. Right frame ­ Displays the key legend (navigation keys). Above the key legend is an area reserved for a text description of the currently selected field. · BIOS setup navigation keys The BIOS setup utility uses a key-based navigation system called hot keys. Use the following keys to move around the Setup utility. · · · Left and Right arrow keys ­ Move between menu selections. Tab or Up/Down arrow keys ­ Move the cursor to the field you want. Enter key ­ Display a submenu screen. Note: Primary menus marked by a (>) include submenu fields. 55 · + and - keys ­ Select a value for the currently selected field (only if it is user-configurable). Press these keys repeatedly to display each possible entry, or the Enter key to choose from a pop-up menu. Esc ­ If you press this key: · · · · · · On one of the primary menu screens, the Exit menu displays. On a submenu screen, the previous screen displays. When you are making selections from a pop-up menu, closes the pop-up without making a selection. · F1 ­ Display the BIOS setup General Help panel. [. . . ] 3 Press the arrow keys to choose the specific physical drives, then press the space bar to associate the selected drive with the current array. The indicator for the selected drive change from READY to ONLINE. 4 5 6 7 8 9 Add two more drives to the current array, then press Enter. Press Enter again to select another array to configure. [. . . ]