User manual ACER M342 QUICK START GUIDE

[. . . ] Push the steam control to the Calc-Clean position and hold it (Fig. 6 Gently shake the iron until all water in the water tank has been used up (Fig. Caution: While scale is flushed out, steam and boiling water also come out of the soleplate. 7 Set the steam control back to t (dry ironing). [. . . ] After the Calc-Clean process 1 Plug in the iron. Let the iron heat up to let the soleplate dry. 2 Unplug the iron when the temperature light goes out. 3 Move the iron gently over a piece of cloth to remove any water stains on the soleplate. 4 Let the iron cool down before you store it. Storage 1 Unplug the iron and set the steam control to t (dry ironing). €¯2) 2 Wind the mains cord round the cord storage facility and store the iron on its heel (Fig. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. €¯If you are unable to solve the problem with the information below, visit www. Com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details). Problem Water drips from the soleplate or wet spots appear on the garment during ironing. Note:To use turbo steam , keep the steam control pressed to the turbo steam position continuously. Set an ironing temperature at which the steam boost function can be used ( 2 to MAX). use the Calc-Clean function (see chapter ‘Cleaning and maintenance’ , section ‘Calc-Clean function’). Empty the water tank and set the steam control to position ‘dry’ after use. Do not fill the water tank beyond the MAX indication. Pour excess water out of the water tank. If you want to use turbo steam, you have to keep the steam control in the turbo steam position continuously. For other steam settings, this is not necessary. Caution: Do not set the steam control to a steam setting if the set temperature is below 2 or when the iron is still heating up (when the temperature light is on).  Otherwise water may leak from the iron. Features Spray function -Press the spray button to moisten the article to be ironed. [. . . ] Steam boost function -Press and release the steam boost button for a powerful boost of steam to remove stubborn creases (Fig. Vertical steam -You can use the steam boost function when you hold the iron in vertical position for removing creases from hanging clothes, curtains etc (Fig. Safety auto-off function (specific types only) --The iron switches off automatically if it has not been moved for 30 seconds in horizontal position or 8 minutes in vertical position. The auto-off light starts flashing (Fig. [. . . ]