User manual ACER MP-330

[. . . ] Reading: 9MB/S Windows98/Me/2000/XP 32 ohm earphone20mW20mW output Max 12 hours 80 - 320 kbps 5GB /20GB FAT / FAT16/FAT32 128×128 dots 5ºC~ +40ºC 96. 5mmx65mmx21mm Installation only be needed under Windows98, other operation systems don't need to install, such as Windows Me, Windows 2000 and above, Mac OS 9. X/10. X or above Hard disk Interface Storage medium Power Transfer speed Operation System Earphone Output Playback Time Bit Rate Support Capacity Support Format LCM Display Operating Conditions Size Driver 1. 5 The system requirement of Acer MP-330 1) PC Hard disk Requirements: IBM PC, compatible PC, notebook, Apple Macintosh with USB interface 2) Operator System Requirements Microsoft Windows XP/2000/ME/98, Mac OS 9. X/10. X above or other operator systems which support the protocol of USB Mass Storage. 2 Installation Guide of Acer MP-330 When the MP3 Player is connected to computer, the LCM will show the following picture: You should not disconnect the MP3 Player from the PC while it is reading or writing, or else it will cause your data lost. Please safe pop out the device before you unplug it. 2. 1 Windows98 Operation System Under win98, this installation will install the driver & Tools for the player. 2) An Autorun interface will appear, click the Installation ICON and the follow window will appear: 3) Click the Next button and follow the install wizard steps, the following window will appear: 4) Wait for the pop up window as the follow. 5) 6) Click the button OK and the system will restart. [. . . ] There are 3 items in the menu as the following description: Set the recording bit-rate and hits by press up/down key. To select the recording source, ether MIC-In or Line-In Contract adjust, the detail description is in the chapter 4. 3. 4. . 4. . 2 Voiice Recordiing 4 4 2 Vo ce Record ng To select the input device as MIC, press Play key to start voice record, the record time and remainder HDD capacity will be displayed, To save a recording file just press the play key again. After you have done a voice recording, the system will create a folder RECORD in the root of the HD Disk. 4. . 4. . 3 Liine IIn Recordiing 4 4 3 L ne n Record ng To select "Rec Input" as Line-In, start the line-in playing source and press "Play" key to begin a record. The LCM will show you as the picture: 9 4. . 4. . 4 Voiice// Liine--iin Pllay 4 4 4 Vo ce L ne n P ay In mode select interface, select Music icon and into RECORD folder, use UP/DOWN key to select the voice recorded file, then press Play key, then you can play the Voice/ Line-in recorded file. 4. . 5 USB Hostt Operattiion 4 5 USB Hos Opera on There is a USB Host in this machine so that you can use it to play/ copy/Delete the files in an outside flash disk. Plug a flash disk into the USB Host via the accessory USB line. It will identify the flash disk automatic. And a UD Icon will appear on the LCM to cue that the flash disk can be used. 4. 5. 1 Play the music in USB Flash Disk Press the ESC key till to the disk select interface; you can select the flash disk as the following graphic: And then you can enter to the flash disk to select the songs you need to play. The detail operations are as the description in chapter 4. 2. 4. . 6 Fiille Arrangementt 4 6 F e Arrangemen You can Copy/ Cut/ Paste/ delete between flash disk and Acer MP-330 directly. Select a source file or directory you want to copy on the flash disk and then press "A-B " key, it will show you the file operation interface Last Result This item is for check the previous file operation. Copy Files a. Press ESC key to select flash disk as the source c. Press A ­B key to select "Copy" d. Press ESC key to select HD card as a target disk, choose folder to paste the file. Press A ­B key to select Paste item, it will paste the file/directory automatic f. To copy a file/directory from HD to Flash disk, you can follow the same steps 10 Delete files Select the UD card or MP-330 HDD and select the file/directory. Enter file operation menu and select delete file item, press enter key to delete the selected file/directory. [. . . ] - Connect the DC supply and turn on the player. - Turn on your computer, connect the player to the USB port and turn on the player. - If the above step does not resolve the problem, Please contact our servers. [. . . ]