User manual ACER TRAVELMATE 420

[. . . ] TravelMate 420 series User's guide Copyright © 2002 Acer Incorporated. TravelMate 420 Series Notebook Computer User's Guide Original Issue: May 2002 Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. [. . . ] Insert the lock into the notch and turn the key to secure the lock. Some keyless locks are also available. Using passwords Passwords protect your computer from unauthorized access. Setting these passwords creates several different levels of protection for your computer and data: · Supervisor Password prevents unauthorized entry into the BIOS Utility. Once set, you must key-in this password to gain access to the BIOS Utility. See "BIOS Utility" on page 43 for more details. User Password secures your computer against unauthorized use. Combine the use of this password with password checkpoints on boot-up and resume from hibernation for maximum security. Password on Boot secures your computer against unauthorized use. Combine the use of this password with password checkpoints · · 33 on boot-up and resume from hibernation for maximum security. English · Hard Disk Password protects your data by preventing unauthorized access to your hard disk. Even if the hard disk is removed from the computer and moved to another computer, it cannot be accessed without the Hard Disk Password. Important!Do not forget your Supervisor and Hard Disk Password!If you forget your password, please get in touch with your dealer or an authorized service center. Entering passwords When a password is set, a password prompt appears in the left-hand corner of the display screen. · · When the Supervisor Password is set, a prompt appears when you press F2 to enter the BIOS Utility at boot-up. Type the Supervisor Password and press Enter to access the BIOS Utility. If you enter the password incorrectly, a warning message appears. When the User Password is set and the Password on boot parameter is enabled, a prompt appears at boot-up. Type the User Password and press Enter to use the computer. If you enter the password incorrectly, a warning message appears. When the Hard Disk Password is set, a prompt appears at boot-up. Type the Hard Disk Password and press Enter to use the computer. If you enter the password incorrectly, a warning message appears. Try again and press Enter. · · · · Important! [. . . ] Udskiftning må kun ske med batteri af samme fabrikat og type. Léver det brugte batteri tilbage til leverandøren. ADVARSEL Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. [. . . ]