User manual ACER TRAVELMATE 4050

[. . . ] TravelMate 4050 Series User's Guide Copyright © 2004 Acer Incorporated. TravelMate 4050 Series Notebook Computer User's Guide Second Issue: October 2004 Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. [. . . ] Press <Alt> + <F10> to open the Acer eRecovery utility. In the Acer eRecovery window, select "Recovery actions" and click "Next". There are four restore actions available. Select the desired restore action and follow the onscreen instructions to complete the restore process. Note: The "Restore C:" item is enabled only if there is a user backup stored on the hard drive (D:\). Please refer to the Create backup section. Create factory default image CD When the System CD and Recovery CD are not available, you can create them by using this feature. Press <Alt> + <F10> to open the Acer eRecovery utility. In the Acer eRecovery window, select "Recovery settings" and click "Next". In the Recovery settings window, select "Burn image to disk" and click "Next". In the Burn image to disc, select "01. Factory default image" and click "Next". Follow the instructions on screen to complete the process. 48 2 Customizing my computer English Re-install bundled software without CD Acer eRecovery stores pre-loaded software internally for easy driver and application re-installation. Press <Alt> + <F10> to open the Acer eRecovery utility. In the Acer eRecovery window, select "Recovery actions" and click "Next". In the Recovery settings window, select "Reinstall applications/ drivers" and click "Next". Select the desired driver/application and follow the instructions on screen to re-install. At first launch, Acer eRecovery prepares all the needed software and may take few seconds to bring up the software content window. Change password Acer eRecovery is protected by a password that can be changed by the user. The password is used by both Acer eRecovery and Acer disc-todisc Recovery. Follow the steps below to change the password in Acer eRecovery. Press <Alt> + <F10> to open the Acer eRecovery utility. In the Acer eRecovery window, select "Recovery settings" and click "Next". In the Recovery settings window, select "Password: Change Acer eRecovery password" and click "Next". Follow the instructions on screen to complete the process. Note: If the system crashes, and will not boot to Windows, users can run Acer Disc-to-Disc to restore the factory default image under DOS mode. 49 Acer Disc to Disc Recovery Note: This feature is only available on certain models. English Multilingual operating system installation Follow the instructions to choose the operating system and language you use when you first power-on the system. Acer multilingual operating system selection menu will pop-up automatically. [. . . ] Below information is for products with such devices. European Union (EU) This device complies with the essential requirements of the European Council Directives listed below: 73/23/EEC Low Voltage Directive · · · · EN 60950 EN 55022 EN 55024 EN 61000-3-2/-3 89/336/EEC Electromagnetic Compatibility (EMC) Directive 99/5/EC Radio & Telecommunications Terminal Equipment (R&TTE) Directive · · · · Art. 3. 1a) EN 60950 Art. 3. 1b) EN 301 489 -1/-17 Art. 3. 2) EN 300 328-2 Art. 3. 2) EN 301 893 *applied to 5 GHz only 78 Appendix B Notices English List of Applicable Countries EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece, Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in the countries of European Union, as well as Norway, Switzerland, Iceland and Liechtenstein. This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact local office in the country of use. The FCC RF safety requirement The radiated output power of Wireless LAN Mini-PCI Card and Bluetooth® card is far below the FCC radio frequency exposure limits. [. . . ]