User manual ACER TRAVELMATE X313-E QUICK START GUIDE

[. . . ] Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product. Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either (1) for free by downloading it from http://support. Com/download or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to: ACERTeK Computer Inc. [. . . ] You can use the <+> or <-> keys to adjust the value. The CPU Input Voltage item appears only when they SVID Support item is set to [Auto] or [Disabled]. Chapter 3: BIOS setup DRAM Voltage [Auto] Allows you to set the DRAM voltage. You can use the <+> or <-> keys to adjust the value. According to Intel® CPU specifications, DIMMs with voltage requirement over 1. We recommend that you install the DIMMs with the voltage requirement below 1. PCH VLX Voltage [Auto] Allows you to set the I/O voltage on the PCH (Platform Controller Hub). You can use the <+> or <-> keys to adjust the value. PCH Voltage [Auto] Allows you to set the Core voltage for the PCH (Platform Controller Hub). You can use the <+> or <-> keys to adjust the value. �������������������������������������������������� The values range from 0. Active Processor Cores [All] Allows you to choose the number of CPU cores to be enabled in each processor package. Configuration options: [All] [1] [2] [3] Limit CPUID Maximum [Disabled] When set to [Enabled], this item allows the legacy OS to boot even without support for CPUs with extended CPUID functions. Configuration options: [Disabled] [Enabled] Chapter 3 3-26 Execute Disable Bit [Enabled] XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS (SuSE Linux 9. Configuration options: [Disabled] [Enabled] Chapter 3: BIOS setup Intel Virtualization Technology [Disabled] Configuration options: [Disabled] [Enabled] When set to [Enabled] a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. Hardware Prefetcher [Enabled] Allows you to enable the Mid Level Cache (L2) streamer prefetcher. Configuration options: [Disabled] [Enabled] Adjacent Cache Line Prefetch [Enabled] Configuration options: [Disabled] [Enabled] Allows you to enable the Mid Level Cache (L2) prefetching of adjacent cache lines. ] Allows you to select the performance state that the BIOS will set before OS handoff. Configuration options: [Max Non-Turbo Performance] [Max Battery] [Turbo Performance] Dynamic Storage Accelerator [Disabled] Configuration options: [Enabled] [Disabled] Allows you to enable or disable the Dynamic Storage Accelerator for C state configuration. CPU Power Management Configuration This item allows you to manage and configure the CPU’s power. Enhanced Intel SpeedStep Technology [Enabled] Allows your system to adjust the processor’s voltage and cores frequency, resulting in decreased power consumption and heat production. [Disabled] The CPU runs at its default speed. [. . . ] Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. aSUS TRAVELMATE X313-E A-1 Appendices IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. [. . . ]