User manual ACER U5200

[. . . ] Use the attached RGB cable with this equipment so as to keep interference within the limit of an FCC Class B device. This apparatus must be grounded. When using the projector in Europe: COMPLIANCE NOTICE This Projector complies with the requirements of the EC Directive 89/336/EEC "EMC Directive" as amended by Directive 92/ 31/EEC and 93/68/EEC, and 73/23/EEC "Low Voltage Directive" as amended by Directive 93/68/ EEC. The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterized by their connection to the public low voltage power supply system. DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE. CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75. [. . . ] · After selecting the items marked with , press the ENTER button. INSTALLATION 3. Press the ENTER button (or opt. button). XGA60 OFF OFF INSTALLATION AUTO POWER ON AUTO POWER OFF EN-15 ENGLISH Menu operation (continued) 1 IMAGE CONTRAST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use to adjust the image contrast. XGA60 becomes higher as the value increases. IMAGE BRIGHTNESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use to adjust the image brightness. The image CONTRAST 0 becomes brighter as the value increases. BRIGHTNESS 0 WHITE ENHANCE . . . . . . . . . . . . . . . . . . . . . . Use to adjust the white level of the projected image. COLOR TEMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use to adjust the color temperature. COLOR 0 COLOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use to adjust the color intensity of the image. TINT 0 TINT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use to adjust the color balance of the image. The SHARPNESS 0 color balance shifts to green as the value increases and shifts to purple as the value decreases. (AvailAUTO GAMMA MODE able only when VIDEO or S-VIDEO is chosen as the source. ) · When the TV50 (PAL, SECAM) signal is input, TINT can't be adjusted. SHARPNESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use to adjust the image sharpness. matically activated when a film source signal is inputted. When OFF is selected, the film mode will not be AUTO CINEMA MODE ?AUTO VIDEO SIGNAL VIDEO SIGNAL. . . . . . . . . . . . . . . . . . . . . . . . . . . When AUTO is selected, the appropriate video format ON ANAMORPHIC is automatically selected depending on the input sigPASSWORD MENU ACCESS FUNCTION nal. If the image isn't displayed correctly, select the AË English LANGUAGE desired video format manually. OK RESET ALL ANAMORPHIC. . . . . . . . . . . . . . . . . . . . . . . . . . . . Select ON when playing DVD discs containing data of widescreen images. Use to change the mode of the password lock or to enable or cancel the password lock. LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use to select the language used in the menu. ( / English / Español / Deutsch / Français / Italiano / / / / PORTUGUÊS). [. . . ] Please contact Kensington Technology Group below. Kensington Technology Group 2855 Campus Drive San Mateo, CA 94403, U. S. A. Phone : +1- (650) 572-2700 Fax : +1- (650) 572-9675 EN-27 ENGLISH Specifications (continued) Connectors COMPUTER IN/OUT (Mini D-SUB 15-pin) 11 15 10 6 1 5 IN pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Spec. [. . . ]