User manual ACER VERITON Z2621G

[. . . ] Record the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number, and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated. Model Number : _________________________________ Serial Number: ___________________________________ Purchase Date: ___________________________________ Place of Purchase: ________________________________ Acer and the Acer Logo are registered trademarks of Acer Inc. [. . . ] Gently pull the DDR DIMM out of the socket (3). To install a DDR DIMM 1 Locate the DDR DIMM socket on the mainboard. 72 4 Upgrading your computer 2 Align the DDR DIMM with the socket (1). Press the DDR DIMM into the socket until the clips lock onto the DDR DIMM (2, 3). Note: The DDR DIMM sockets are slotted to ensure proper installation. If you insert a DDR DIMM but it does not fit easily into the socket, you may have inserted it incorrectly. Turn the DDR DIMM around and try to insert it again. To reconfigure your computer Your computer automatically detects the amount of memory installed. Run the BIOS utility to view the new value for total system memory and make a note of it. Replacing the hard disk Follow these steps to replace your computer's hard disk: 1 2 Remove the computer cover (see page 62). Detach all cables connected to the CD or DVD drive and the 3. 5inch floppy drive. 73 3 Press the tabs (a) and (b) on both sides of the drive frame to release it from the housing. Rotate the drive frame to a 90-degree angle (c); then pull out (d), and remove the drive frame (e). 74 4 Upgrading your computer 4 Detach hard disk cable (a) and power cable (b) from the hard disk. Then, remove the screw that holds the hard disk to the housing (c). Set the screw aside. 5 Slide the hard disk frame to the right (d); then gently move it inward (e) and pull it up to detach it (f). 75 6 Install the new hard disk into the housing (a, b, c, d, e). Secure it with the screw you removed earlier (f) and connect the power and hard disk cables to the new hard disk (g, h). 76 4 Upgrading your computer 7 Reinstall the drive frame into the housing (i, j). Make sure the tabs on both sides snap into place. 8 Reattach the CD or DVD drive and the floppy drive cables. Note: Make sure that the other ends of the disk drive cables are securely connected to their corresponding connectors on the mainboard. 9 Replace the computer cover (see page 63). Installing an expansion card To install an expansion card: Caution: Your system accepts low profile PCI cards only. 1 2 3 Remove the computer cover (see page 62). 5 When you are done reviewing the summary, click Finished. 86 5 System utilities You can schedule customized virus scans that run unattended on specific dates and times or at periodic intervals. If you are using the computer when the scheduled scan begins, it runs in the background so that you do not have to stop working. For more information about Norton AntiVirus, including setting up custom scans and scheduling scans, refer to the Norton AntiVirus Help menu. 87 NTI CD-Maker (for models with CD-RW) The NTI CD-Maker is a CD-Recording software which allows you to create and copy audio, data and videos to CD-R or CD-RW discs. To copy an audio or data disc: 1 2 3 Click the Quick Burning icon on the desktop. Insert the CD you would like to copy into the source drive and a blank disc into the target drive. Choose the source and target drives from the pull-down lists. 88 5 System utilities 4 Click the Start button to begin copying. For more information about NTI CD-Maker and its other features, refer to the NTl CD-Maker Help menu. 89 PowerDVD (for models with DVD) PowerDVD is a high-quality, pure software DVD player which brings high-quality movies and karaoke to your multimedia PC. You can play back high resolution DVD titles or MPEG-2 files with MPEG-2 video and Dolby Digital (AC-3) audio. PowerDVD provides a complete set of commands for navigation and advanced features such as multi-angle switching, multi-language and multi-subtitle selection, and parental control. It also has the i-Power Internet Enabling feature, which links to online DVD resources via the Power DVD Desktop Portal Page. How do I open PowerDVD and watch a DVD? In most cases, when you insert a DVD into your computer's optical drive, PowerDVD will automatically open a viewer window and the control panel and begin playing. If PowerDVD does not open automatically: 1 2 3 4 Click the Start button in the taskbar. Highlight All Programs Click the Cyberlink PowerDVD tab Select PowerDVD to begin When PowerDVD opens simply press the play button playback. For more information about Cyberlink PowerDVD and its other features, refer to the PowerDVD Help menu. 90 5 System utilities BIOS utility The BIOS utility is a hardware configuration program built into your computer's Basic Input/Output System (BIOS). Since most computers are already properly configured and optimized, there is no need to run this utility. However, if you encounter configuration problems and get the "Run Setup" message, you will need to run this utility. Note: Before you run BIOS, make sure that you have saved all open files. [. . . ] AVOID EXPOSURE TO BEAM. 109 Lithium battery statement CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions. Macrovision® statement This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. [. . . ]