Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ACER X110P. We hope that this ACER X110P user guide will be useful to you.
Lastmanuals help download the user guide ACER X110P.
Detailed instructions for use are in the User's Guide.
[. . . ] Use the attached RGB cable, RS-232C cable with this equipment so as to keep interference within the limit of a FCC Class A device. The projector automatically shuts off when the lamp is used up in about 2, 000 hours and cannot be used until the lamp is replaced and the internal timer is reset. DO NOT LOOK DIRECTLY INTO THE LENS WHEN PROJECTOR IS IN THE POWER ON MODE. When using the projector in Europe COMPLIANCE NOTICE This LCD - Video Projector complies with the requirements of the EC Directive 89/336/EEC "EMC Directive" as amended by Directive 93/68/EEC and 73/23/EEC "Low Voltage Directive" as amended by Directive 93/68/EEC. [. . . ] Adjusts keystone correction of the image. If the image has XGA60 keystone distortion, select the approximate setting. For INSTALLATION normal use, select 0°. To select whether to boot up automatically when the power is AUTO POWER OFF ON turned on external to the projector. In this case, the main AUTO POWER OFF OFF power switch of the projector has to be ON. Set this when the SPLASH SCREEN ON projector is hanging on the ceiling. IMAGE REVERSE OFF · The projector is in stand-by mode when the lamp is not on. In this case, use the remote control to turn on the lamp. Use to select the length of time before projector switches to stand-by when there is no input signal selected source. Use to display the splash screen on the screen when the power is turned ON. IMAGE REVERSE Use to reverse or invert the projected image. In this case, adjust CLAMP POSITION CLAMP POSITION or CLAMP WIDTH. LINES pixels of the input signal for normal setting. ) PLL VERT. LINES . . . . . . (Adjust to the vertical SHUTTER(U) lines of the input signal for normal setting. ) SHUTTER(L) PLL . . . . . . . . . . . . . . . . . . . . . . Use to adjust the image when skewed on top. Select AUTO SHUTTER(LS) for normal setting. Use to adjust the image when its motion does not run smoothly. Use to adjust the image when the noise etc. Use to adjust the image when the noise etc. Use to adjust the image when the noise etc. Use to adjust the image when the noise etc. appears on right side of image.
0 0 0 0 AUTO AUTO 0 0 0 0
User memory for signal setting
This projector can memorize the maximum of 2 signal menu settings. [. . . ] · This is typical of the LCD projector. · The operation is incorrectly made due to noise or interference.
· Plug the connecting cable securely into the terminal. · Install the projector far away from other equipment. · Turn on the monitor.
· Press the reset button on the Terminal board. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ACER X110P
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ACER X110P will begin.
ACER X110P ǔ (5977 ko)
