User manual ACER X1120H

[. . . ] Use the attached RGB cable and RS-232C cable with this equipment so as to keep interference within the limit of a FCC Class B device. DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE. CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment, ANSI/NFPA 75. When using the projector in Europe: COMPLIANCE NOTICE This Projector complies with the requirements of the EC Directive 89/336/EEC "EMC Directive" as amended by Directive 92/31/EEC and 93/68/EEC, and 73/23/ EEC "Low Voltage Directive" as amended by Directive 93/68/EEC. [. . . ] · When COLOR ENHANCER is sRGB, COLOR TEMP. , COLOR and TINT can't be adjusted. Select to set the gamma curve and BrilliantColorTM as desired. (See page 26. ) Use to adjust the contrast of the projected image. (See page 25. ) Use to adjust the brightness of the projected image. (See page 25. ) Use to adjust the color temperature. (See page 26. ) Use to adjust the color thickness of the projected image. (See page 25. ) Use to adjust the color tint of the projected image. (See page 25. ) · When the TV50 (PAL, SECAM) signal is input, TINT can't be adjusted. Use to adjust the sharpness of the projected image. (See page 25. ) FUNCTION Select this option when you want to view images in a well-lit room. Select to moderate the intensity of the lamp. (Select this option for normal use. ) 16:9 This option allows you to select the display position of squeezed (or horizontally compressed) images stored on DVD discs. By pressing the ENTER button, you can select the display position among CENTER, UPPER, and LOWER. REAL Select to project images in their original size as input. Not available when the keystone adjustment is applied. PASSWORD FUNCTION Use to enable or cancel the password lock. MENU POSITION 2 options Use to change the position of the menu. CINEMA MODE AUTO The film mode will be automatically activated when a film source signal is input. OFF The film mode will not be activated. VIDEO SIGNAL 8 options When AUTO is selected, the appropriate video format is automatically selected depending on the input signal. If the image isn't displayed correctly, select the desired video format manually. SET UP AUTO Select to change the SET UP mode automatically. [. . . ] In this case, adjust TRACKING in the SIGNAL menu. TV60 and TV50 are equivalent to 480i and 576i respectively. When these signals are supplied to the VIDEO or S-VIDEO signal, the signal mode is indicated as TV60 or TV50. When they are supplied to the COMPONENT terminal, the signal mode is indicated as 480i or 576i. [. . . ]