User manual ACER X1311KW

[. . . ] DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE. CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment, ANSI/NFPA 75. When using the projector in Europe: COMPLIANCE NOTICE This Projector complies with the requirements of the EC Directive 89/336/EEC "EMC Directive" as amended by Directive 92/31/EEC and 93/68/EEC, and 73/23/ EEC "Low Voltage Directive" as amended by Directive 93/68/EEC. The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system. [. . . ] (Select this option for normal use. ) Select to make the displayed image look bright and crisp. Select to make the displayed image look natural. This option, suitable for viewing movies, makes the displayed image look soft and smooth. Select to give priority to the color reproducibility. · When COLOR ENHANCER is sRGB, COLOR TEMP. , COLOR and TINT can't be adjusted. Select to set the gamma curve and BrilliantColorTM as desired. (See page 26. ) Use to adjust the contrast of the projected image. (See page 25. ) Use to adjust the brightness of the projected image. (See page 25. ) Use to adjust the color temperature. (See page 26. ) Use to adjust the color thickness of the projected image. (See page 25. ) Use to adjust the color tint of the projected image. FEATURE menu ITEM SETTING ASPECT AUTO 16:9 REAL PASSWORD FUNCTION MENU POSITION CINEMA MODE VIDEO SIGNAL SET UP 2 options AUTO OFF 8 options AUTO OFF 3. 75%/7. 5% ON / OFF FUNCTION Select to change the aspect ratio automatically depending on the input signal. (Select this option for normal use. ) This option allows you to select the display position of squeezed (or horizontally compressed) images stored on DVD discs. By pressing the ENTER button, you can select the display position among CENTER, UPPER, and LOWER. Select to project images in their original size as input. Not available when the keystone adjustment is applied. Use to enable or cancel the password lock. The film mode will be automatically activated when a film source signal is input. When AUTO is selected, the appropriate video format is automatically selected depending on the input signal. If the image isn't displayed correctly, select the desired video format manually. Select to change the SET UP mode automatically. · When 7. 5% is chosen, the brightness is decreased by set-up cancel function for U. S. [. . . ] In this case, adjust TRACKING in the SIGNAL menu. · TV60 and TV50 are equivalent to 480i and 576i respectively. When these signals are supplied to the VIDEO or S-VIDEO signal, the signal mode is indicated as TV60 or TV50. When they are supplied to the COMPONENT terminal, the signal mode is indicated as 480i or 576i. [. . . ]