User manual ACOUSTIC ENERGY AELITE 2

[. . . ] The units are housed within vented die-cast chassis reducing stray magnetic flux to a minimum and increasing power handling. The tweeter - or treble driver - is a high-quality neodymium unit with a silk fabric dome integrating smoothly with the rest of the system. All drive units are fully magnetically shielded so that the speaker can be used in close proximity to a TV screen or monitor for AV applications. [. . . ] The Acoustic Energy AELITE Centre loudspeaker uses quality OFC internal wiring, which enhances detail and transparency. Positioning Position the AELITE Centre either immediately above or below your screen, whichever places the speaker nearest ear level when listening. Line the front of the AELITE Centre approximately in line with the front left + right speakers. When fine-tuning, adjust the levels of the left, centre and right speakers to give a balanced sound as images pan across the screen. Connection Check that your amplifier is switched off before installing your loudspeaker. Failure to do so may result in speaker or amplifier damage. The diagram illustrates one loudspeaker only. Conventional Normal passive wiring requires shorting links to be in place between the treble/mid and bass sections. The positive (ribbed) cable from the amplifier positive (or red) terminal should connect with the positive (red) terminal on the loudspeaker. Similarly the negative (smooth) cable should connect the amplifier negative terminal (black) to the negative terminal (black) on the loudspeaker. Bi-wiring Bi-wiring separates the bass and treble ground paths in the loudspeaker and offer sound quality advantages. Dual chamber, high power, low turbulence bass reflex port. 8. 0kg 450 x 190 x 297 mm Warranty Your Acoustic Energy loudspeakers are guaranteed against original defects in materials, manufacture and workmanship for 3 years from the date of purchase. Please retain all original packaging materials for possible future use. We suggest that you complete details of purchase now and keep this information in a safe place for future reference. Under this warranty Acoustic Energy agrees to repair any defect or, at the company's discretion, replace the faulty component(s) without charge for parts or labour. This warranty does not imply any acceptance by Acoustic Energy or its agents for consequential loss or damage and specifically excludes fair wear and tear, accident, misuse or unauthorised modification. This warranty is applicable in the United Kingdom only and does not in any way limit the customer's legal rights. Claims and enquiries under the warranty for AE products purchased outside the UK should be addressed to the local importers or distributors. If you have reason to claim under the warranty please contact your dealer in the first instance. [. . . ] If you have reason to claim under the warranty please contact your dealer in the first instance. Dealer's name:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Address:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]