User manual ACR ELECTRONICS GLOBALWATCH2 AIS INSTALLATION MANUAL V1.0

[. . . ] TM GlobalWatch Installation Manual Version 1. 0 2 AIS Y1-03-0183-1 Rev. A Please read this first! Warning: Although ACR strives for accuracy in all its publications; this material may contain errors or omissions, and is subject to change without prior notice. ACR shall not be made liable for any specific, indirect, incidental or consequential damages as a result of its use. ACR components may only be used in safety of life devices or systems, with the express written approval of ACR, as the failure of such components could cause the failure of the ACR device or system. [. . . ] Change Password Protection | -----| | Msg. | | -----| | Displ| ---------------------------------------NUM| Select->| | |<-Back Enter the new Password: Repeat the new Password: A minimum of 4, a maximum of 8 characters are allowed. Should the new password include numbers, use the shift key to generate them. N 1^25' E 0^18' |1>0. 10|2>1. 30|3>1. 80nm ******* Change User Password *********** Enter new password : Repeat new password: {Length: 4. . 8 characters} ---------------------------------------| Save | | | Back Press Save to store the changes. GlobalWatch2TM AIS Installation Manual 12 Y1-03-0183-1 Rev. A Version 1. 0 4. 3 Changing the MMSI / IMO Numbers Select "Service Configuration" from the Main Menu with the cursor button [Up] & [Down] or press Nr. 6 on the keyboard. N 1^19' E 0^13' |1>0. 01|2>1. 30|3>1. 80nm |---------------------------------| Menu -----| | | +- 1. Display Settings -----| | Displ| ---------------------------------------NUM| Select->| | |<-Back Input Service Password and press [Enter]. N 1^23' E 0^16' |1>0. 01|2>1. 30|3>1. 80nm ---------------------------------------++++++++++++++++++++++++++++++++++++++++ Service password protected!Please enter service password: ++++++++++++++++++++++++++++++++++++++++ ---------------------------------------| Enter | | | Exit GlobalWatch2TM AIS Installation Manual 13 Y1-03-0183-1 Rev. A Version 1. 0 Select Submenu 3 "Change MMSI/IMO" with cursor button [Up] & [Down] by pressing Nr. 3 on the keyboard. N 1^21' E 0^14' |1>0. 01|2>1. 30|3>1. 80nm |---------------------------------| 6. | | -----| | Displ| ---------------------------------------NUM| Select->| | |<-Back Input new MMSI / IMO Numbers and press [Save] to store input data. Press [Back] to return to the Submenu without saving. Note: The IMO number 303174162 has to be deleted. If the ship has no IMO registration, then use number 0 or number 1. It is very important that a number with one digit has to be used! N 1^21' E 0^14' |1> N/A|2>0. 00|3>0. 10nm ********** Change MMSI / IMO *********** MMSI :1193046 IMO No. :303174162 ---------------------------------------NUM| Save | | | Back GlobalWatch2TM AIS Installation Manual 14 Y1-03-0183-1 Rev. A Version 1. 0 4. 4 Inputing Voyage Related Data ­ (User Password Protected) Select "Voyage Settings" from the Main Menu with the cursor button [Up] & [Down] or press Nr. 3 on the keyboard Note: The default User Password is set to "NAUT" ­ please reconfigure it immediately after Transponder initial operation N 1^20' E 0^13' |1> N/A|2>0. 00|3>0. 10nm |---------------------------------| Menu -----| | | +- 1. Display Settings -----| | Displ| ---------------------------------------NUM|Select->| | |<-Back The password query field appears. Input new User Password and press [Enter]. N 1^31' E 0^24' |1>0. 01|2>1. 30|3>1. 80nm ---------------------------------------++++++++++++++++++++++++++++++++++++++++ User password protected!Please enter user password: ++++++++++++++++++++++++++++++++++++++++ ---------------------------------------| Enter | | | Exit GlobalWatch2TM AIS Installation Manual 15 Y1-03-0183-1 Rev. A Version 1. 0 Scroll the Voyage Data Fields with [Enter] and input own vessel data. Select a default Cargo Type and NavStat Setting with the cursor buttons [Left] & [Right]. Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing [Exit]. [. . . ] 2mm 5) Beschriftung: "CH4" "ext. 1, 6 gelötet ANLIEFERFORM: Zu Ring gebunden, verpackt in PE-Beutel Toleranz Maßstab: 1:1 Masse: NAUTICAST ISO 2768-mK Datum Bearb. Gepr. --AIS Cable with assembled plugs / Workboat F 02 01 51 Änderung PDM-Neuausgabe Mitteilung 27. 05. 2002 W50 MAT W50 HL System AutoCad 2002 14. 09. 2004 12. 11. 2002 27. 05. 2002 Datum NAU W50 W50 Name Blatt NAU-B508-*-06 File: 1 1 Bl. A3 1 2 2) 3 12 10 11 2) 15 13 14 4 3 5 4 3 5 4 Zust. CH1 Sensor 1 CH2 Sensor 2 Y1-03-0183-1 Rev. A 1 2 3 4 5 6 7 8 A 10m ±10mm A 2) 3) 4 1) B 7 1) B 1, 2 C Weitergabe sowie Vervielfaltigung dieser Unterlage, Verwertung und Mitteilung ihres Inhaltes nicht gestattet, soweit nicht ausdrucklich zugestanden. [. . . ]