User manual ACR ELECTRONICS NAUTICAST INLAND INSTALLATION REV E

[. . . ] Please read this first! Warning: Although ACR strives for accuracy in all its publications; this material may contain errors or omissions, and is subject to change without prior notice. ACR shall not be made liable for any specific, indirect, incidental or consequential damages as a result of its use. ACR components may only be used in safety of life devices or systems, with the express written approval of ACR, as the failure of such components could cause the failure of the ACR device or system. If these fail, it is reasonable to assume that the safety of the user or other persons may be endangered. Copying of this document, and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. [. . . ] Note: It is critical for the proper orientation of your ship to other AIS users to enter this data accurately. Example: Length of ship = 220m and Beam = 43m. GPS ANTENNA location on ship (is x in above Menu example) is located 200 meters from bow (A) and 33 Meters from Starboard side (D). Note: You can only enter Dimension A and D. You would enter A200D33 (without spaces, no decimals and no commas). The line than should look like the example above for External Reference point. Note: When only using internal GPS antenna it is ok to have default values for external position since they are not used. RefPointExt = A200 B20 C10 D33m (Position of the external GPS antenna) A = the distance from bow (front) to the antenna. B= the distance from the antenna to the stern (rear) C = the distance from the port (left) side to the antenna D = the distance from the antenna to the starboard (right) side Enter RefPtInt (location of the internal GPS antenna) in the same way. Save the new settings by pressing [Save]. Press [Back] return to the Main Menu Screen without saving any changes. Installation Manual 37 Y1-03-0212 Rev. E 4. 4 Entering Voyage Related Data Select from the Main Menu "3. Voyage Settings" This option requires the USER password. The default password from the factory is mentioned on your AIS display at the protection foil. Please see the appendix in your User Manual for additional password information. Enter Password and use the up and down arrows to edit Voyage Related data then press Enter or the numeric reference on the keypad to select and edit. Save after editing. Main Menu Example: N 1 o20' E 0 o13' |1> N/A|2>0. 00|3>0. 10nm |---------------------------------| Menu -----| | | +- 1. Graphical Display Settings | Displ| ---------------------------------------NUM|Select->| | |<-Back The password query field appears. Input new User Password and press [Enter]. Installation Manual 38 Y1-03-0212 Rev. E N 1 o31' E 0 o24' |1>0. 01|2>1. 30|3>1. 80nm ---------------------------------------++++++++++++++++++++++++++++++++++++++++ User password protected!Please enter user password: ++++++++++++++++++++++++++++++++++++++++ ---------------------------------------| Enter | | | Exit N 1 o18' E 0 o12' |1>0. 01|2>1. 30|3>1. 80nm |---------------------------------| 3. | | -----| | Displ| | ---------------------------------------NUM|Select->| | |<-Back Installation Manual 39 Y1-03-0212 Rev. [. . . ] 1. 01 dated 10. 10. 2007) Test Standard for Inland AIS, (Edition 1. 0 dated 31. 5. 2007) GPS Antenna GPS Antenna AIS-A W/5M Coax 2639 2008-11 ACR Electronics Inc. , 5757 Ravenswood Road, Fort Lauderdale, Florida, 33312 USA ACR Electronics Europe GmbH Handelskai 388 / Top 632 A-1020 Vienna, Austria Vienna, 2008-12-05 Zertifikate der benannten Stelle: Certificates from the notified Body / Certificats des Organismes Notifiés Spezifizierte Standards: Specified Standard(s) / Standard(s) Spécifié(s) Zubehörtyp: Type of Accessory ACR Part Number: Dokumentennummer: Document number / Num. du document Hersteller: Manufacturer / Fabricant Anschrift EU-Vertretung: Address EU-Representative / Adresse du Représentant pour l'UE Ort, Datum: place, date / Lieu, Date Unterschrift: Signature / Signature Andreas Lesch Managing Director Diese Erklärung bescheinigt die Übereinstimmung mit den genannten Richtlinien, ist jedoch keine Zusicherung von Eigenschaften. Die Sicherheitshinweise der mitgelieferten Produktdokumentation sind zu beachten. This declaration certifies the compliance with the indicated directives but implies no warranty of properties. [. . . ]