User manual ACT ACTPRO 100PCB DATASHEET

[. . . ] ACTpro 100 / 100PCB Product Overview The ACTpro 100 and ACTpro 100PCB door expanders work in conjunction with the ACTpro 2000 / 3000 two door controllers. [. . . ] The ACTpro 100 has durable polycarbonate housing, is surface mounted and suitable for indoor use only. The ACTpro 100PCB has no housing and fits easily into the ACTpro 200 or standard PSU boxes. Single Door Expander Features include: · Single door expanders for ACTpro 2000 and ACTpro 3000 controllers · Maximum of 14 ACTpro 100 or ACTpro 100PCB door expanders to each ACTpro 2000 and ACTpro 3000 · Programmable inputs and outputs · Auxiliary relay output · Require 12 Volt DC supply · Supports entry/exit readers · ACTpro 100PCB has no casing allowing quicker installation ACTpro 100 ACTpro 100 PCB Product Specification ACTpro 100 Operating Voltage: Consumption: Weight: Operating Temperature: Dimensions (HxWxD, mm): Mounting: 12V DC 40 / 120 mA 414 grams -10 to +50 C 110 x 190 x 60 Surface Indoor ACTpro 100PCB 12V DC 40 / 120 mA 80 grams -10 to +50 C 80 x 130 x 25 Inside PSU Indoor Installation / Specification Guidelines · For indoor use only · The ACTpro 100 and ACTpro 100PCB are compatible with all versions of ACTpro 2000 and ACTpro 3000 controllers · ACTpro 200, ACTpro 100 and ACTpro 100PCB may be connected on the same network Installation: Cabling Chart From Reader To Controller Cable 8 core screen Restriction 30m at 5 Volts 100m at 12 Volts Maximum 1. 4km ACTpro 100 or ACTpro 100PCB ACTpro 2000 or ACTpro 3000 Twisted screen pair Belden 9502 or equivalent or Cat5 Twisted screen pair Belden 9502 or equivalent or Cat5 Cable supplied ACTpro 2000 or ACTpro 3000 PC Direct RS232 Maximum 30m Ordering Information ACTpro 100 Door Station ACTpro 100 PCB Door Station ACTpro 100 ACTpro 100PCB Network RS485 Interface PC Maximum 30m For details of the ACTpro 200 please see overleaf Access Control Technology Unit C1, South City Business Park, Tallaght, Dublin 24, Ireland. w: www. accesscontrol. ie ACTpro 200 2 Door Expander and 3amp Monitored PSU Product Overview The ACTpro 200 is a two door expander for the ACTpro 2000 and ACTpro 3000 controllers, complete with built-in, monitored 3 Amp power supply. The power supply supports two doors, each with its own fuse and battery support. [. . . ] An 18swg mild steel cabinet provides ample room for wiring and batteries, and the lid will accomodate two ACTpro 100 pcbs. Programme Features include: 2 door expander 3 Amp monitored PSU Battery deep-discharge protection Fuse blown LED indication Mains fault indication Supports 2 x 7AHr batteries Accomodates 2 ACTpro 100 pcbs on lid Supports entry/exit readers Installation / Specification Guidelines ACTpro 200 Product Specification Mains Voltage: Frequency: Weight: Operating Temperature: Dimensions (HxWxD): Installation: Mounting: Mains Fuse: Lock Fuse: Ripple Voltage: 230V AC +10% - 15% 47 - 63 Hz 4873. 5 grams 0 to +50 C 355 x 370 x 85 mm Indoor Only Surface 630mA 1. 25A Quick Blow <200mV For indoor use only The ACTpro 200 connects to ACT controllers on the DOORS network The ACTpro 200 is compatible with all versions of ACTpro 2000 and ACTpro 3000 controllers Up to 7 ACTpro 200s can be connected to a controller ACTpro 200 and ACTpro 100 may be connected on the same network (maximum 16 doors, including controller) Cabling Chart From ACTpro 200 2000/3000 To Controller Cable Twisted screen pair Belden 9502 or equivalent or Cat5 8 core screened Restriction Maximum 1. 4km ACTpro 200 door station with 3 Amp Monitered PSU Reader ACTpro 200 30m at 5 Volts 100m at 12 Volts 100 200 100 Ordering Information ACTpro 200 Door Station ACTpro 200 Door Door Door Door ACTpro 2000/3000 controllers and ACTpro 100 expanders require a 12 volts DC supply ACTpro 200 Schematic For details of the ACTpro 100 please see overleaf [. . . ]