User manual ACT ACTWINPRO

[. . . ] This manual refers to ACTWinPro Version 2. 2 and above. reserve the right to change the contents of this manual and the system it applies to without prior notice. While every effort has been taken by ACT to ensure the accuracy of the information contained within this document, ACT assumes no responsibility for any errors or omissions. No liability is assumed for damages resulting from the use of information contained within this document. Access Control Technology Unit C1, South City Business Centre, Tallaght, Dublin 24, Ireland. [. . . ] This option may be assigned to individual users or to groups. Activate OP3 This option causes the local OP3 output to be fired for a predetermined period of time whenever the user is granted access. This option may be assigned to individual users or to groups. Arm/Disarm ACT Controllers (ACT3000/ACT2000/DS100e) units may be integrated with intruder alarm panels. Users with the Arm/Disarm option can toggle the AUX relay output on the controller, which tells the alarm panel to arm or disarm. While the door is armed, no access is permitted until a user with the Arm function disarms the door. Disarming the door toggles the output and disarms the panel. Page 58 Access Control Technology DATABASE MENU ACTWinPro The door returns to normal mode. The AUX output must be programmed as an Arm Intruder Panel output. This is programmed under Aux Output Settings Monitor User Users with this option may be located quickly in the User Tracking window. This would allow a receptionist, for example, to locate certain members of staff continuously. Verify Visually A user with this option will have their photograph pop-up on the screen when they are granted access at one of the challenge doors. Visitor Card Users with this option are considered as visitors in the system. They may be enabled or disabled from Visitor Cards under Tools. User fields 1-10 The ten remaining fields in the user view are text fields each of which may contain up to 48 characters for user-defined purposes. The names of the fields may be defined in the General Options Page. The user fields are searchable via the User Search Dialog. Photo ID User photographs may be displayed here. To add a photo click on Change which brings up the Photo Import dialog Signature A USB pen device may be used to capture the signature of the user. The signature may be printed out on a card. ACT recommends using IntegriSign signature pad devices http://www. integrisign. com Signature is not available on older operating systems (prior to Windows 2000). Page 59 Access Control Technology DATABASE MENU ACTWinPro User Group The user group view is a window into the user group information stored in the ACTWinPro database. Using the record navigation buttons on the toolbar or the Record menu, individual groups may be selected and viewed. The right side of the screen displays information about the selected group and allows it to be edited. The left side of the screen displays the System Tree. [. . . ] If extra modules are purchased to run on ACTWinPro, they must also be registered before use. ACTWinPro is available with a 2, 3, 4 or 5-user license. The 5-user license allows an unlimited number of users to be connected. Page 114 Access Control Technology CARD EDITOR ACTWinPro CARD EDITOR The CardEditor is used to create and design card templates. These templates are used by ACTWinPro to when printing a users' card. [. . . ]