Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ACTIONTEC ECB2200. We hope that this ACTIONTEC ECB2200 user guide will be useful to you.
Lastmanuals help download the user guide ACTIONTEC ECB2200.
Manual abstract: user guide ACTIONTEC ECB2200CONFIGURATION GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] The following section provides a step-by-step installation guide of a Windows XP PC: Note: The user will lose LAN / WAN connections on the wired / wireless networks while configuring the ECB2200. Network connections should resume after exiting the User Configuration Mode. [. . . ] Once you have logged into the ECB2200, you will be able to change the operational parameters and perform firmware upgrade (See next section for detailed information). Upon completion, the ECB2200 will need to be changed back to MoCA Mode. To change back to MoCA Mode, manually toggle the ECB2200 Configuration Switch to "Run". The ECB2200 will reboot itself automatically with the new parameters. The reboot process will take approximately 35 seconds to complete.
Operational Parameters
The User Configuration Interface consists of five main menus Setup, Password, Advanced, MoCA and Upgrade. The operating parameters in each of the five menus are described below: Note: The "Apply" button must be clicked for changes to any of the configuration options to take effect.
Setup Menu
Figure 3 PC App Setup Page
Channel:
The Channel parameter provides the user with the ability to control the frequency at which the ECB2200 operates. The user may set the device to operate in "SCAN" mode (default setting) or any one of the 8 fixed D-Band frequencies via this pull down menu. Privacy / Password: Privacy Mode controls whether or not the ECB2200 will encrypt packets on the coaxial interface. The user can either enable or disable (default setting) Privacy Mode. The Password parameter under Privacy Mode contains an encryption key that is used by the ECB2200 to encrypt data on the coax interface. If Privacy Mode is enabled, then all the nodes on the same cable wiring will need to have the same Privacy Password in order to form a network. The default Privacy Password is "99999999988888888" (Nine 9's, eight 8's)".
Password Menu
Figure 4 PC App Password Setup
Administrative / Password:
The Password Menu contains the login password to the ECB2200 (not to be confused with the Privacy Password for the coaxial network described in the Setup Menu). [. . . ] After selecting the firmware, click on "Upgrade" button to begin the firmware update. A typical upgrade required 2 to 3 minutes to complete. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ACTIONTEC ECB2200
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ACTIONTEC ECB2200 will begin.
