Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ADDONICS CPR5SA. We hope that this ADDONICS CPR5SA user guide will be useful to you.
Lastmanuals help download the user guide ADDONICS CPR5SA.
Detailed instructions for use are in the User's Guide.
[. . . ] Enclosure Overview
HD0 HD1
Addonics
TECHNOLOGIES
HD2 HD3 HD4
Locking Mechanism Power LED
Compact RAID CPR5SA
HD0 HD4 Button Functions: A. Push-Open Button Press button for each drive slot to open the front HDD panel If the locking mechanism is set to LOCK position, the button cannot be pressed. [. . . ] Change Mode: press button over 2 seconds
Technical Support
B.
Phone: Hours: Email: 408-453-6212 8:30 am - 6:00 pm PST http://www. addonics. com/support/query/
RAID Setting DIP switch Reset Device / Change Mode button Power switch / Buzzer disable button
II.
Using the onboard RAID DIP switch DIP Switch 2 ON ON OFF OFF ON ON OFF OFF
RAID Status RAID 0 (stripped) RAID 10 JBOD (Large) RAID 3 Clone RAID 5 RESERVED Normal (Individual drives)
1 ON ON ON ON OFF OFF OFF OFF
3 ON OFF ON OFF ON OFF ON OFF
Power connector eSATA connection Installation Guide 1. To open the front panel, press the push-open button. Slide the 2. 5" SATA hard drive into the slot. Select the setting desired using the DIP switch table. Using the provided eSATA to eSATA cable, connect one end to the eSATA port on the RAID box and the other end to the eSATA controller card. Press the power switch button for more than 2 seconds. Wait for power LED status to change from starting to ready. Press the "Change mode" button for more than 2 seconds. Navigate to the Disk Management utility to configure the drives.
Note: for the system to detect multiple individual drives, the RAID box must be connected to a port multiplier compatible eSATA host controller. If the RAID box is NOT connected to a port multiplier compatible eSATA host controller, the system will only detect one drive and that is the hard drive in slot HD0.
RAID Monitoring LED RAID Status RAID 10 Two Options for Setting RAID on the Compact RAID Box (only select one option) I. [. . . ] Use the RESERVE DIP switch setting when using the JMicron HW RAID Manager. RAID 3 RAID 5 Clone JBOD (Large) RAID 0 LED Indicator Access Rebuilding Access Rebuilding Access Rebuilding Access Clone Access Access Blue / Flash Blue & Red / Flash Blue / Flash Blue & Red / Flash Blue / Flash Blue & Red / Flash Blue / Flash Blue & Red / Flash Blue / Flash Blue / Flash [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ADDONICS CPR5SA
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ADDONICS CPR5SA will begin.
