Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ADDONICS HDUSI325AES. We hope that this ADDONICS HDUSI325AES user guide will be useful to you.
Lastmanuals help download the user guide ADDONICS HDUSI325AES.
Detailed instructions for use are in the User's Guide.
[. . . ] Choose option 1 from the menu:
Once the scan is complete, the LCD will display the corresponding results
4 ReScan Bus Choose option 4 from the menu:
Press ENT to begin copy. The system will auto-detect the hard disks and show the following info on the LCD.
Press ENT to re-scan hardware. The LCD will display the following info.
Press ENT to begin scanning IDEO0:Master/Save ~ IDE1:Master/Slave. The LCD will show the following info during the copying process: remaining time, completed percentage. [. . . ] By default the first menu option is Copy HDD. 6. 8 System Info This option displays system information. 6. 4 Auto Compare This option automatically compares the source hard disk with the target hard disk after a copy operation is completed. 7 USB Mode Note: Though this is an active menu, we recommend you not to use this since no USB connection is present for this HDD Duplicator. This HDD Duplicator is a STANDALONE unit. Press ENT and the LCD will display the corresponding information as shown below. 6. 7 Device Info This option is used to display the details of all hard disks connected to the copy controller.
Press ENT to access option. Use the Up and Down arrow keys to choose On.
6. 5 Copy with detect This option is used to detect any newly connected DOM devices (can be used as hard disk and supports hot swapping) before starting a copy process.
Use the Down arrow to select YES then press ENT again to switch to USB Mode. The LCD will display the following info.
Now press ENT to switch to stand-alone mode. The LCD will display the following info.
Appendix A LCD Messages
Press ENT and the LCD will display the corresponding info. Use the Down arrow to select YES to return to stand-alone mode. The controller will prompt you to restart the device.
Basic Troubleshooting 6. 1 LCD If the LCD display is blank after the device is turned on, check that the power cable is properly connected and that the power supply is on. 6. 2 Error Message When the system is running a copy operation or hardware diagnostics then operation was manually terminated by pressing ESC, an error message will be shown by the LCD. This may lead to an illegal operation and cause the device to stop reminding. If this happens, the device must be restarted. 6. 3 Hard Disk If unable to read the hard disk please check that the data and power cables are properly connected. When making a copy please make sure that you have set the source hard disk correctly. 6. 4 Keys If pressing the keys on the front panel produces no response from the system, the keys may have malfunctioned. 6. 5 Startup/Shutdown Do not suddenly turn off the power while the system is performing an operation. After shutting down normally, wait a moment (usually around 2 seconds) before starting the system again so it can run its self-diagnostics.
Connecting with a HDD: All data will be lost, format?. . . . . . . . . . . . . Delete Image in Partition xx?. . . . . . . . . . . . . Confirm the deleting of data image in partition xx. Format HDD?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Flash ROM fail!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Invalid firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The disc doesn't contain a valid firmware. Last update F/W Fail!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ADDONICS HDUSI325AES
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ADDONICS HDUSI325AES will begin.
