User manual ADEMCO VISTA-128B

[. . . ] Security System User's Guide VISTA-128B Commercial Burglary Alarm System K3270 6/98 TABLE OF CONTENTS SYSTEM OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 A Partitioned System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This will make it easier when actually programming the schedule. Arm/Disarm Windows Disarm Window Start Time HH:MM Stop Time HH:MM Arm Window Start Time HH:MM Stop Time HH:MM Mon Tue Wed Thu Fri Sat Sun Programming Temporary Schedules Temporary schedules only affect the partition from which it is entered. Temporary schedules can be reused at later dates simply by scrolling (by pressing #) to the DAYS?prompt (described below) and activating the appropriate days. This should be considered when defining daily time windows. Note that only users with authority level of manager or higher can program temporary schedules. The following prompts will appear. Using Schedules (cont'd) ­ 48 ­ MON DISARM WIND. 07:45AM 08:45AM The cursor will be positioned on the tens of hours digit of the start time for Monday's disarm window. The minutes are entered in the same manner. The AM/PM indication is changed by hitting any key, 0-9, while the cursor is under the letter A/P position. Press the * key to move to the arming window for Monday. Press # to move to the next screen display without making changes. The cursor will be positioned on the tens of hours digit of the start time for the arm window. Repeat the previous steps to enter the start and stop time for Monday's arming window. After the windows for that day have been completed, the system will prompt for disarm and arm time windows for the next day. Repeat the procedure for all days of the week. When all of the days have been completed, the system will ask which days are to be activated. MON ARM WINDOW 07:45AM 08:45AM TUE DISARM WIND. 07:45AM 08:45AM ­ 49 ­ Using Schedules (cont'd) DAYS ?MTWTFSS HIT 0-7 X X This is the prompt that actually activates the temporary schedule, and allows the temporary schedule to be customized to a particular week's needs. To select the days which are to be activated, enter the desired number 1-7 (Monday = 1). An "X" will appear under that day, indicating the previously entered schedule for that day is active. Entering a day's number again will deactivate that day. The temporary schedule will only be in effect for the days which have the letter x underneath them. [. . . ] 26 User Edit Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 User Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 User's Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]