User manual ADS TECH USB INSTANT VIDEO

[. . . ] USB USB USB USB USB USB USB USB USB USB USB USB USB USB USB USB USB USB USB Instant Video User Guide, Rev. 2. 0 Product Part# USBAV-170 Product UPC: 7-57887-17000-4 website: www. adstech. com email: support@adstech. com © 2001 ADS Technologies. All Rights Reserved First Edition: Revision 2. 0 May, 2002 Microsoft, MS-DOS, Windows, Windows 95 and Windows 98 are registered trademarks of Microsoft Corporation. IBM is a registered trademark of the International Business Machines, Inc. [. . . ] NTSC is the TV STANDARD that is used in the USA, CANADA, MEXICO and JAPAN. PAL is the TV STANDARD in use in EUROPE, SOUTH AMERICA, AUSTRALIA and MOST OF WORLD. Specify the length of video you want to capture by entering the timecode in the Capture duration entry box. (If you don't specify a length before capturing, you can stop the capture manually by pressing escape. ) 8. Click OPTIONS in the CAPTURE SETTINGS Tab. In the CAPTURE OPTIONS dialog box, select Capture to Library if you want to add the video clip into the library. By doing this, you make the video clip available for other projects. Click OPTIONS again in the CAPTURE SETTINGS Tab of the and select VIDEO FORMAT, you will see this window: 10 11. Change the settings for the VIDEO FORMAT to window below: MAKE SURE YOU PICK: Compression: I420 Frame Size: 352x240 12. Click OPTIONS again in the CAPTURE SETTINGS Tab and Select CAPTURE PROPERTIES. You will see a box similar to the one below: 13. Select VIDEO CAPTURE FILTER, click PROPERTIES and you will see the screen below. This is where you can change video settings and select your video input source. Since you can connect an SVHS source and a COMPOSITE (Yellow RCA Jack) video source you would need to select your input. Click OPTIONS again in the CAPTURE SETTINGS Tab and Select CAPTURE PROPERTIES. Select VIDEO CAPTURE PIN, click PROPERTIES. This is where you need to double check that you have the following settings: MAKE SURE YOU PICK: Compression: I420 Frame Size: 352x240 15. Lastly, you need to tell Video Studio to capture from the right AUDIO SOURCE. Click OPTIONS again in the CAPTURE SETTINGS Tab and Select CAPTURE PROPERTIES. Select USB INSTANT VIDEO as your CAPTURE SOURCE and click OK. 11 CAPTURING VIDEO AND EXPORTING TO VCD With VIDEOSTUDIO 6 correctly configured to capture in VCD mode, you can now go ahead and start capturing video by clicking on the CAPTURE VIDEO ICON on the upper left side of the screen. Once you have captured all your clips and placed on the TIMELINE, added effects and titles, you can CLICK on the FINISH TAB and CLICK on SAVE TO VCD. This will render your whole project into one file. [. . . ] (ADS) warrants this product against defects in material and 16 workmanship for a period of One (1) year from the date of original purchase from ADS or an authorized ADS dealer. This warranty applies only to the original purchase of the product and is not transferable. This warranty does not cover any incompatibilities due to the user's computer, hardware, software or other related system configuration in which the product interfaces. Proof of purchase will be required before any warranty consideration by ADS occurs. [. . . ]