User manual ADS TECH USBAV-700 USB INSTANT DVD

[. . . ] IBM is a registered trademark of the International Business Machines, Inc. ADS is a registered trademark of ADS Technologies Inc. ADS Technologies (ADS) makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The information furnished within this written document is for information purposes only and is subject to change without notice. [. . . ] The device drivers are located at the root of the USB Instant DVD CD. Let Windows Search for the appropriate drivers. Windows will find the drivers on the Instant DVD CD and load them for you. Follow the instructions on the New Hardware Wizard and click "Finish" once the drivers are installed. Install Application Software The USB Instant DVD AutoRun installation menu should be on the screen. Follow these steps to install necessary software applications: 1. ) Click the "Install Drivers" button to install the all necessary drivers install the USB Instant DVD capture and export utility and other software that is NECESSARY for proper installation of the device. Instant DVD Capture and Export utility b. The Video Studio 5 AutoRun screen will appear. Install Video Studio 5 and all associated applications. This will install the MyDVD 3. 0 application. Install all the other bundled software now or at a later time by inserting the Instant DVD CD and selecting the desired software application. ] Installation notes: During the Instant DVD application installation we will prompt you to enable "DMA" on your IDE hard drives. When DMA is not enabled you will likely drop video frames resulting in jerky video captures. We will also set your VGA resolution to 1024 x 768. This is the optimal resolution for viewing video at full resolution. DVD video is captured at 704 x 480 (704 x 576) PAL. If your resolution is not high enough you will not be able to view the video at full resolution. 7 uvs5_1edited. p65 7 12/5/01, 10:47 AM 5. Verify Hardware Installation Check Device Manager to verify that the USB Instant DVD hardware is recognized by Windows and is properly installed. Win98, Win98SE, WinME: 1. ) Click Start, Settings, Control Panel. 4. ) Double click the Imaging Device heading. WinXP, Win2000: 1. ) Click Start, Settings, Control Panel. 4. ) Double click the Imaging Device heading. If USB Instant DVD is listed under the Imaging Device heading, then the device is properly installed. 8 uvs5_1edited. p65 8 12/5/01, 10:47 AM 5. Windows Audio Mixer Settings Windows Audio Mixer Settings USB Instant DVD uses your computer sound card to record and playback the audio portion of your video recordings. You need to set up your audio mixers to properly capture the audio. [. . . ] These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna . [. . . ]