User manual ADVANCE ACOUSTIC X-PREAMP

[. . . ] HEED WARNINGS All warnings on the appliance and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. WATER AND MOISTURE The appliance should not be used near water for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. VENTILATION The appliance should be situated so that its location or position does not interfere with its proper ventilation. [. . . ] MULTIFUNCTIONS BUTTON This button has three functions: you can adjust the level of the sound, you can select the different menus and options of your preamplifier (Inputs, Balance, Bypass (On or Off), Treble (only if bypass is Off), Bass (only if bypass is Off), Dimmer and Info (software version). r t AFFICHEUR DROIT Cette afficheur vous indique le volume choisi. LEFT DISPLAY This display indicate the level of the volume PRISE CASQUE 6, 35MM La sortie casque de votre préamplificateur permet d’alimenter un casque stéréophonique conventionnel (non fourni) disposant d’une prise de type jack 6, 35mm stéréophonique. le niveau de sortie de cette prise ne permet pas l’utilisation d’un casque électrostatique. HEADPHONES The headphone terminal provides a stereo audio signal sufficient for driving all conventional stereo headphones except electrostatic headphones which generally require signal from a high level ouputs. L’accés aux autres menus et la validation de vos choix se fait façon identique How to use the multifunctions button Plug your preamplifier on the outlet, then switch ON the general power supply swich located on the rear panel. The voltage indicator will light on and the stand by button located on the front panel will light on in red. Push the standby button (front panel) and the light will become white, the left display indicate ADVANCE and the right display the level of the volume, then after a short time, the left display indicates the last selected source when the preamplifier was shut Off. The right display indicate the volume of the last use. You can increase or decrease the sound level with this button. At that time, you can select the different menus of your preamplifier. Push one time the center of the button and the left display indicates INPUT. Turn the button and you can choose a different source, push again the center of the button to confirm your choice. A > before the source indicate that your choice has been confirmed. WARNING You can eliminate this confirmation time by using the remote control Selections and confirmations of others menus and options work identically. INPUTS You can connect your stereo sources on those inputs. These inputs are suitable for any line level source equipment such as tuners, CD players, DVD, MP3 players, etc. note: These inputs are for analogue audio signals only. They should not be connected to the digital output of a CD player or any other digital device. PHONO INPUT AND GROUND TERMINAL You can connect your turntable on the RCA connectors left (L) and right (R). Turntables normally includes a single wire earth lead. Use the phono ground connector to connect this lead. [. . . ] USB INPUT Note: Do not turn on the unit until all connections have been made. You can listen music files that are on your computer. Connect a USB ‘B–A’ cable from the preamplifier USB input to one of the USB ports on the PC or Mac. compatible with Window 2000 / Window XP / Vista / 7 , Linux , and Mac OS X. [. . . ]