User manual ADVANCE MDB-607

[. . . ] VENTILATION DAMAGE REQUIRING SERVICE The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed. Sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. HEAT The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliance (including amplifiers) that produce heat. [. . . ] Internet radio services offer news, sports, talk, and various genres of music—every format that is available on traditional radio stations. The MAT-605 tuner and its digital radio interface MDB-607 is the future of radio. Forget about listening to the same tunes and choose from over 11, 000 Internet radio stations from every corner of the globe. The perfect music is always available, the stations are presorted by country and genre, and assigning your favorites to station buttons is a breeze. We're pleased that you've chosen an Advance Acoustic. Your MAT-605 and MDB-607 are designed to give you simple, convenient access to thousands of Internet radio stations worldwide via wired (Ethernet RJ-45) and wireless (WiFi) network connections!The MAT-605 and MDB-607 are the ideal complement to your audiophile HiFi system. POWER ON INDICATOR The MDB-607 module will switch ON only if it is connected to the MAT-605 tuner. To connect this module to your tuner, please use the RJ-45 cable included in the carton. This RJ-45 cable must be connected between the output “TO MAT-605” of your MDB-607 module and the input “TO MDB-607” of your MAT-605 tuner. When you swtich ON your MAT-605 tuner, then the MDB-607 will switch ON automatically. INTERFACE CONNECTOR TO MAT-605 Your digital radio module MDB-607 must work together with your tuner MAT-605. You must connect the RJ-45 cable which is included with your MDB-607 . Be careful, this cable is specific, also, use it only between the MAT-605 and the MDB-607. ETHERNET INPUT Use this port if you would like to integrate your MDB-607 into your network via a wired connection. To connect the MDB-607 to your router in this manner, use a standard network cable (twisted pair with RJ45 plugs). Two LEDs near the port show the status of the link: (orange) indicates a live connection and network traffic is signaled by a (green) LED (usually flickering). DAB / DAB+ ANTENNA If you have access to DAB/DAB+ radios, screw the included articulated antenna onto this connector. If possible, please ensure that the antenna is set to a vertical position to ensure the best possible reception. WIFI ANTENNA If you have access to a wireless LAN (WLAN), screw the included articulated antenna onto this connector. If possible, please ensure that the antenna is set to a vertical position to ensure the best possible reception. DIGITAL OPTICAL OUTPUT With this digital optical output (Toslink format), you can use an external DAC (Digital Audio Converter), connect the optical digital output of your MDB-607 to the optical digital input of the DAC (Digital audio converter). [. . . ] NOTE Quality of internet radios could be very different, it depends of the signal compression of the original format. To know this ratio, press RDS mode and the ratio will appear. 128kbps is the minimum for good HiFi quality. SPÉCIFICATIONS ET PERFORMANCES PERFORMANCE SPECIFICATIONS The MDB-607 is a complete hardware and software solution for Internet radio, network streaming, DAB/DAB+ to be use with the MAT-605 tubes FM tuner. [. . . ]