User manual AEG-ELECTROLUX 68031K-IN 09S

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. and please pass it to any future owner of the appliance. [. . . ] STOP+GO locks the whole control panel except the sensor field All cooking zones are equipped with an automatic warm-up function. When setting a heat setting using the automatic warm-up function, the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set. Control panel Display Touch Move your finger down from to se/, lect the desired heat setting between after 5 seconds . and As long as is displayed , the appliance works at full power. After the automatic warm up is completed, the heat setting / is displayed again. The length of time that the automatic warm up function operates depends on the heat setting selected. Using the child safety device The child safety device prevents unintentional use of the appliance. Touch for 4 seconds The child safety device is switched on. The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards. Touch for 4 seconds lights up Until the appliance is next switched off, it can used as normal. After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds, a signal sounds and the cooking surface switches off automatically. If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. When the appliance is switched off, if one or more of the sensor fields on the control panel are covered for more that 10 seconds, an acoustic signal sounds. The acoustic signal switches itself off automatically when the sensor fields are no longer covered. When a saucepan boils dry) the cooking zone automatically switches itself off. Before being used again, the cooking zone must be set to 0 and cooled down. If cookware that is not suitable is used, lights up in the display and after 2 minutes the indicator for the cooking zone switches itself off. If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. Before being used again, the cooking zone must be set to . Heat setting 1-3 4-6 7-8 9 -14 Switches off after 6 hours 5 hours 4 hours 1. According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. [. . . ] ) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. Anti-shock protection must be provided by the installation, for example drawers may only be installed with a protective floor directly underneath the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant. [. . . ]