User manual AEG-ELECTROLUX 86731K-MN

[. . . ] The appliance must not be used as a work surface or as a storage surface · Small children must be kept away from the appliance. Only let bigger children work on the appliance under supervision. To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device. Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards. [. . . ] Using the child safety device The child safety device prevents unintentional use of the appliance. Touch for 4 seconds Control panel Switch on appliance. Switching off the child safety device Do not set a heat setting. The child safety device can only be switched on and off if no heat setting is set. Overriding the child safety device The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards. Touch Control panel Switch appliance on for 4 seconds lights up Display/Signal Until the appliance is next switched off, it can used as normal. After switching off the appliance, the child safety device is active again. After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds, otherwise the appliance automatically switches itself off. Function Automatic cut-out Condition a heat setting is set Outcome after the time has elapsed acoustic signal 00 flashes Cooking zone switches off acoustic signal 00 flashes Cooking zones not in use If just one countdown value is set you can change it only when the appliance is switched on. If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. Control panel Touch Touch Touch once once once Display Pilot light of the first cooking zone flashes Pilot light of the second cooking zone flashes Pilot light of the third cooking zone flashes Control panel Touch once Display Pilot light of the fourth cooking zone flashes If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes. After a few seconds the pilot light flashes more slowly. Select Touch Control panel cooking zone Display Pilot light of cooking zone selected flashes faster Time remaining is displayed The time remaining counts backwards to 00 . Control panel Selecting a cooking zone Display Pilot light of the selected cooking zone flashes more quickly Remaining time is displayed After a few seconds the pilot light flashes more slowly. Control panel field Select cooking zone Display Pilot light of the cooking zone selected flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. Touch Control panel field Acoustic signal Acoustic signal to acknowledge. If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. If one or more sensor fields are covered by objects (a pan, etc. 10 seconds, a signal sounds and the cooking surface switches off automatically. If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. [. . . ] Otherwise hot cookware may be knocked off the rings when doors and windows are opened. Make electrical mains terminal free of voltage. Loose and inappropriate plug and socket connections can make the terminal overheat. If this appliance's mains cable is damaged, it must be replaced by a special cable (type H05BB-F Tmax 90°C; or higher). [. . . ]