User manual AEG-ELECTROLUX BP7614000M

[. . . ] BP7614000 BP7714000 EN OVEN USER MANUAL 2 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you'll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags. . . Visit the webshop at: www. aeg-electrolux. com/shop Contents 3 CONTENTS 4 8 9 10 12 14 16 18 20 22 26 27 30 Safety information Product description Before first use Control panel Daily use Clock functions Automatic programmes Using the accessories Additional functions Care and cleaning What to do if. . . [. . . ] You can not use Count Up Timer when Duration or End is set. Clock functions 15 Setting the DURATION 1. Activate the appliance and set an oven function and temperature. Touch again and again until the display shows . Use If you touch or during setting hours for DURATION, the appliance goes to setting of the END function. When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. Touch any sensor field or open the oven door to stop an acoustic signal. Deactivate the appliance. Setting the END 1. Activate the appliance and set an oven function and temperature. Touch again and again until the display shows . or to set END (first you set minutes and then hours) and or 3. When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. Touch any sensor field or open the oven door to stop an acoustic signal. Deactivate the appliance. to con- Setting the SET+GO To start of the appliance with necessary settings with only one touch of the sensor field, any time later. Set an oven function (or programme) and temperature (refer to "Setting the oven function" and "Changing the oven temperature"). Set DURATION (refer to "Setting the DURATION"). Touch again and again until will flash in the display. This dot shows which clock function is activated. Touch any sensor field (apart from ON/OFF) to start the SET+GO function. You can use SET+GO function only if DURATION is set. 16 Automatic programmes Setting the Time delay function DURATION and END can be used at the same time, if the oven is to be switched on and off automatically later. In this case first set DURATION and then END function (refer to "Setting the DURATION" and "Setting the END "). [. . . ] Touch and hold until an acoustic signal sounds (for minimum 5 seconds). Touch and hold and at the same time for 2 seconds until an acoustic signal sounds. Replace the oven lamp. The "Demo" function is on. The oven lamp does not operate The oven lamp is defective Installation Problem The display shows C2 Possible cause Solution 27 You want to start the Pyro- Remove the core temperature sensor plug from the lytic cleaning, Keep warm socket. or Defrost function but you did not remove core temperature sensor plug from the socket. [. . . ]