User manual AEG-ELECTROLUX CG6600 (EAST)

[. . . ] Customer g Dear read this user manual carefully, Please Paying special attention to the safety notes!Keep the manual in a safe place for later reference, and pass it on to any new owner. Key to picture 38 Front view (Figure 1) 38 Milk container (Figure 2) 38 Front view with open service door (Figure 3) 38 1. 8 Looking up the number of coffees dispensed, number of jugs dispensed and number of descaling procedures (statistics) 54 13. [. . . ] The display automatically jumps back to the menu option «AUTO SHUTOFF TIME» after programming. To go back to the coffee mode, press the "MENU" button (Figure 5) or wait about 120 seconds until the appliance automatically jumps back to coffee mode. If "OK" is not pressed, the appliance 3 automatically returns to the coffee mode after about 120 seconds without saving the entries. 0 The display automatically jumps back to the menu option «TEMPERATURE» after programming. 0 To go back to the coffee mode, press 13. 4 the "MENU" button (Figure 5)or wait about 120 seconds until the appliance automatically jumps back to coffee mode. You can adjust and change this to suit your taste. The coffee strength can be adjusted in 5 steps from extra mild to extra strong and the filling quantity can be adjusted in 10 steps with the aid of a graphic bar. You can change these settings as follows: Press the "MENU" button (Figure 5). If necessary select a different coffee strength in 5 steps from extra mild to If the appliance is not used for a while it switches itself off automatically for safety and energy saving reasons. You can choose between 3 switch-off times (automatic switch-off after 1 to 3 hours): «AUTO SHUTOFF TIME 1 H» «AUTO SHUTOFF TIME 2 H» «AUTO SHUTOFF TIME 3 H» The factory setting is «AUTO SHUTOFF TIME 1 H». You can change this as follows: 0 Press the "MENU" button (Figure 5). 0 When the desired coffee strength is displayed, confirm it with the"OK" button (Figure 6). This coffee strength is programmed in accordingly. If "OK" is not pressed, the appliance automatically returns to the coffee mode after about 120 seconds without saving the entries. The display automatically jumps back to the menu option «JUG COFFEE TASTE» after programming. 0 If you want to change and save the filling quantity for the jug, press thescrolling button ">" (Figure 5) until the menu option «JUG OR CUP LEVEL» appears. 0 Confirm the menu option with the "OK" button (Figure 6). 0 A bar appears on the display, which can be made bigger or smaller; this represents the cup filling quantity. If necessary a different filling quantity can be selected using the scrolling buttons "<" or ">" (Figure 5) in 10 steps. You can change and save these quantities for every cup size to suit your taste. You can change the filling quantity for each of the five cup sizes «ESPRESSO CUP», «SMALL CUP», «MEDIUM CUP», «LARGE CUP», «MUG»: Press the "MENU" button (Figure 5). [. . . ] Empty the water tank and the waste coffee container. Please bear in mind where the appliance is stored, particularly during the cold part of the year. You can find out further information about recycling this product from your local council, your waste collection service or the company where you bought it. In case of necessary repair, including replacing the power lead, please first call our AEG-Electrolux help line. [. . . ]